| SAE J 2244/1 CONNECTIONS FOR FLUID POWER AND GENERAL USE. PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING |
| Tiancheng Group_Steel-Tube.com 2008-05-19 14:07:50 Author:Sun June Source: Font size:[Large][Middle][Small] |
|
SAE J 2244/1 CONNECTIONS FOR FLUID POWER AND GENERAL USE. PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING
PART 1: PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
1. Scope.
This part of SAE J2244 specifies dimensions for fluid power metric ports for use with adjustable and nonadjustable stud ends shown in SAE J2244/2. Ports in accordance with this part of SAE J2244 may be used at working pressures up to 63 MPa for nonadjustable stud ends and 40 mPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc. For threaded ports and stud ends specified in new designs in hydraulic fluid power applications, only SAE J2244 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and SAE J1926 (ISO 11926) shall not be used for new designs in hydraulic fluid power applications.
2. Index Terms:
Connectors; Dimensions, Connections; Hydraulic systems, Tubing; Ports; Hoses, Connections; Hydraulic systems, Coupling; Pipes, Connections; Tubing, Connections;
3. Cross Reference(s):
ISO 6149-1; ISO 261; ISO 1179-1; ISO 1179-2; ISO 1179-3; ISO 1179-4; ISO 1302; ISO 2306; ISO 5598; ISO 6149-2; ISO 6149-3; ISO 7789; ISO 9974-1; ISO 9974-2; ISO 9974-3; ISO 11926-1; ISO 11926-2; ISO 11926-3; ANSI/ASME B1.13M; SAE J 343; SAE J 1926; SAE J 2244/2;
4.SAE International .org
|
|
