SAE-AS-85049/11-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR
MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/112-2004 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED
SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE-AS-85049/114-2004 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED
SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE-AS-85049/115-2004 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED
SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
SAE-AS-85049/117-2004 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING, PRE-ATTACHED SHIELD TERMINATION
(RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
SAE-AS-85049/118-2005 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, NON-SELF-LOCKING, CATEGORY 4B
(FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/1-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, GROUNDING
(WITHOUT STRAIN RELIEF), CATEGORY 1C (FOR MIL-DTL-5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS) - FSC
5935
SAE-AS-85049/120-2005 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREES SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-
5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/121-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY
4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/123-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90-?SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY 4C
(FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/124-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999
SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/126-2003 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY
4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/127-2004 CONNECTOR ACCESSORIES, ELECTRICAL,BUSHING STRIP CATEGORY 7 (FOR USE WITH SAE AS85049/118, /120, /121,
/123, /124, 126) - FSC 5935
SAE-AS-85049/128-2004 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, SHIELD BAND, CAGEGORY 7 (FOR AS85049/82 - /90, /93, /109 -
/117 ACCESSORIES) - FSC 5935
SAE-AS-85049/130-2004 CONNECTOR ACCESSORIES, ELECTRICAL GASKETING MATERIAL, CONDUCTIVE/ NON-CONDUCTIVE, FLANGE MOUNT,
CATEGORY 7 - FSC 5935
SAE-AS-85049/131-2005 CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, STRAIGHT, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999
SERIES III & SAE AS5590/1 CONNECTORS - FSC 5935
SAE-AS-85049/133-2005 CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, 90-? SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES
III & SAE AS5590/1 CONNECTORS - FSC 5935
SAE-AS-85049/134-2005 CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELLS FILLER PLUG, CATEGORY 7 - FSC 5935
SAE-AS-85049/14-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY
3B (FOR MIL-DTL-38999 SERIES III AND IVCONNECTORS) - FSC 5935
SAE-AS-85049/15-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45 DEGREE, NON-SELF-LOCKING AND SELF-LOCKING,
CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/16-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, NON-SELF-LOCKING AND SELF-LOCKING,
CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/17-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 2B,
(FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/18-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 2B (FOR MIL-C-
38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/19-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 3B (FOR MIL
-C-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/20-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, RFI/EMI CATEGORY 3B (FOR MIL-DTL-38999 SERIES
III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/21-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-C-38999
SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/2-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1C
(FOR MIL-DTL-5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS) - FSC 5935
SAE-AS-85049/23-1998 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 45 DEGREES, SHIELD TERMINATION, CATEGORY
3A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/24-1998 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90 DEGREES, SHIELD TERMINATION, CATEGORY
3A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/25-1998 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY
3A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/26-2001 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY
3A (FOR MIL-C-5015 CRIMP, MIL-C-26842 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/27-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SELF-LOCKING AND NON-SELF
-LOCKING, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/28-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY
3B (FOR MIL-C-83733 CONNECTORS) - FSC 5935
SAE-AS-85049/29-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY
3B (FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/30-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, INDIVIDUAL SHIELDED WIRE
TERMINATION, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/31-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, NON-SELF-LOCKING AND SELF
-LOCKING, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III
CONNECTORS) - F
SAE-AS-85049/3-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-C-22992
CONNECTORS, CLASSES C, J, AND R) - FSC 5935
SAE-AS-85049/32-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90 DEGREE, SHIELDED TERMINATION,
CATEGORY 3C (FOR MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/33-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELDED TERMINATION, CATEGORY
7 (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/34-2001 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, THREADED ADAPTER, CATEGORY 3C (FOR MIL-
C-26842 SERIES I JAM NUT RECEPTACLE CONNECTOR) - FSC 5935
SAE-AS-85049/36-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY
3B (FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/37-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, SPLIT 90-? EMI/RFI SHIELDED TERMINATION,
CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/38-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING,
CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/39-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING,
CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/41-2001 CONNECTOR ACCESSORIES, ELECTRICAL, NONENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-C-
5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS) - FSC 5935
SAE-AS-85049/4-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, SET-UP, CATEGORY 1A (FOR MIL-C-
22992 CONNECTORS, CLASSES C, J, AND R) - FSC 5935
SAE-AS-85049/42-1998 CONNECTOR ACCESSORIES, ELECTRICAL, NONENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4A (FOR MIL-C-
5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS) - FSC 5935
SAE-AS-85049/43-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, SELF-LOCKING AND NON-SELF-
LOCKING, 45 DEGREE, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III
CONNECTORS
SAE-AS-85049/44-2000 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN, RELIEF, STRAIGHT CATEGORY 4C (FOR MIL-C-83733 CONNECTORS) -
FSC 5935
SAE-AS-85049/45-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, NONMETALLIC, CATEGORY 4C (FOR MIL-C-27599
SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/46-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90-? NONMETALLIC, CATEGORY 4C (FOR MIL-C-27599 SERIES
I AND MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/47-2003 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY
4B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) - AMENDMENT 2 - FEBRUARY 2005
SAE-AS-85049/48-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 7 (FOR MIL-DTL-24308 CONNECTORS) -
FSC 5935
SAE-AS-85049/49-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING,
CATEGORY 4B (MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/50-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90-? CATEGORY 7 (FOR MIL-DTL-24308 CONNECTORS) - FSC
5935
SAE-AS-85049/51-2003 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 90, SELF-LOCKING AND NON SELF-
LOCKING CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES III CONNECTORS) - FSC 5935; AMENDMENT 1 -
MAY 2005
SAE-AS-85049/5-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, STEP-DOWN, CATEGORY 1A (FOR MIL-C
-22992 CONNECTORS, CLASSES C, J, AND R) - FSC 5935
SAE-AS-85049/52-2003 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, STRAIGHT, SELF-LOCKING AND NON SELF
-LOCKING CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES III CONNECTORS) - AMENDMENT 2 - JUNE
2006
SAE-AS-85049/53-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-
5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/54-2004 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 45-? CATEGORY 4C (FOR MIL-DTL-5015
CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/55-2004 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON-ENVIRONMENTAL, 90-? SELF-LOCKING AND NON-SELF
-LOCKING, CATEGORY 4C (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III
CONNECTORS) -
SAE-AS-85049/56-2000 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (MIL-C-38999 SERIES I AND II
CONNECTORS) - FSC 5935
SAE-AS-85049/57-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING,
CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/58-2004 CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (MIL-DTL-38999 SERIES I AND II
CONNECTORS) - FSC 5935
SAE-AS-85049/59-2000 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-22992 CONNECTORS, CLASSES
C, J, AND R) - FSC 5935
SAE-AS-85049/60-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-5015 CRIMP, MIL-C-
26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/61-2004 CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (MIL-C-27599 CONNECTORS) - FSC 5935
SAE-AS-85049/6-2001 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45 DEGREE, SHIELD
TERMINATION, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26842 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III
CONNECTORS) - FSC 5935
SAE-AS-85049/62-2000 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-38999 SERIES I AND II
CONNECTORS) - FSC 5935
SAE-AS-85049/63-2003 (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING,
CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/64-2000 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, STRAIGHT, CATEGORY 4C (MIL-C-38999 SERIES I AND
II CONNECTORS) - FSC 5935
SAE-AS-85049/65-2000 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, 90-? CATEGORY 4C (MIL-C-38999 SERIES I AND II
CONNECTORS) - FSC 5935
SAE-AS-85049/69-2004 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINKBOOT, CATEGORY 5 (MIL-DTL-38999 SERIES III AND IV
CONNECTORS) - FSC 5935
SAE-AS-85049/7-2001 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45 DEGREE, CATEGORY 1A (FOR
MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/74-2000 CONNECTOR ACCESSORIES, ELECTRICAL, POTTING BOOT, CATEGORY 7 (FOR USE WITH MIL-C-85049/61 POTTING BOOT
RING) - FSC 5935
SAE-AS-85049/75-2000 CONNECTOR ACCESSORIES, ELECTRICAL, POTTING BOOT, CATEGORY 7 (FOR USE WITH MIL-C-85049/58 POTTING BOOT
RING) - FSC 5935
SAE-AS-85049/76-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90-? SHIELD TERMINATION, CATEGORY 2B,
NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/77-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45-? SHIELD TERMINATION, CATEGORY 2B,
NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/78-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45-? SHIELD TERMINATION, CATEGORY 2B,
NONSELF-LOCKING (MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/79-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90-? SHIELD TERMINATION, CATEGORY 2B,
NONSELF-LOCKING (MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/80-2004 CONNECTOR ACCESSORIES, ELECTRICAL, DUMMY CONTACT, SIZES 12 AND 8, CATEGORY 7 (FOR MIL-DTL-38999
CONNECTORS) - FSC 5935
SAE-AS-85049/81-2000 CONNECTOR ACCESSORIES, ELECTRICAL, SEAL PLUG, SIZE 10, CATEGORY 7 (FOR MIL-C-38999 CONNECTORS) - FSC
5935
SAE-AS-85049/8-2001 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90 DEGREE, SHIELD
TERMINATION, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26842 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III
CONNECTORS) - FSC 5935
SAE-AS-85049/82-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI),
SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723
SERI
SAE-AS-85049/83-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45 DEGREE, SELF-LOCKING, SHIELD, BAND TERMINATION,
(RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B, (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 AND
MIL-C-83723 SE
SAE-AS-85049/84-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90 DEGREE, SELF-LOCKING, SHIELD BAND TERMINATION,
(RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B, (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 AND
MIL-C-83723 SER
SAE-AS-85049/85-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI),
SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/86-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45 DEGREE, SELF-LOCKING, SHIELD BAND TERMINATION,
(RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B, (FOR MIL-C-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/87-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90-? SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI),
SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) - FSC 5935
SAE-AS-85049/88-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI),
SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/89-2004 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45-? SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI),
SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/90-2000 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90 DEGREE, SELF-LOCKING, SHIELD BAND TERMINATION,
(RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B, (FOR MIL-C-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/91-2004 CONNECTOR ACCESSORIES, COMPOSITE, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 4C (FOR
MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/9-2001 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90 DEGREE, CATEGORY 1A (FOR
MIL-C-5015 CRIMP, MIL-C-26842 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS) - FSC 5935
SAE-AS-85049/92-2004 CONNECTOR ACCESSORIES, COMPOSITE, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING, CATEGORY 4C,(FOR
MIL-DTL-38999 SERIES III AND IV CONNECTORS) - FSC 5935
SAE-AS-85049/93-2004 CONNECTOR ACCESSORIES, ELECTRICAL, TERMINATION, SHIELD SPLIT SUPPORT RING, COMPOSITE, NONENVIRONMENTAL,
STRAIGHT, CATEGORY 7 - FSC 5935
SAE-AS-85049/94-2004 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, FULL PERIMETER - AMENDMENT
3 - JUNE 2006
SAE-AS-85049/95-2004 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 3/4 PERIMETER - FSC 5935;
AMENDMENT 2 - JUNE 2006
SAE-AS-85049/96-2004 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 1/4 PERIMETER - FSC 5935;
AMENDMENT 1 - FEBRUARY 2005; AMENDMENT 2 - MARCH 2005
SAE-AS-85049/96-2004 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 1/4 PERIMETER - FSC 5935;
AMENDMENT 1 - FEBRUARY 2005; AMENDMENT 2 - MARCH 2005; AMENDMENT 3: 06/2006
SAE-AS-85049-2003 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR - AMENDMENT 2 - AUGUST 2004
SAE-AS-85052/1-2001 CLAMP, LOOP, TUBE 17-7 PH CRES, 275 DEGREES F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT - FSC
5340
SAE-AS-85052/2-2001 CLAMP, LOOP, TUBE 17-7 PH CRES, 275 DEGREE F, PHOSHATE ESTER FLUID RESISTANT - FSC 5340
SAE-AS-85052/3-2001 CLAMP, LOOP, TUBE 17-7 PH CRES, 500 DEGREES F - FSC 5340
SAE-AS-85052/4-2001 CLAMP SUPPORT - LOOP CLAMP - FSC 5340
SAE-AS-85052-2001 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
SAE-AS-85075/1-2002 TIE DOWN ASSEMBLY, HELICOPTER BLADE CH-46 HELICOPTER - FSC 1730
SAE-AS-85075/2-2002 TIE DOWN ASSEMBLY, HELICOPTER BLADE CH-53 HELICOPTER - FSC 1730
SAE-AS-85075-2000 TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR - FSC 1730; SHOULD BE USED INSTEAD OF MIL-T
-85075A(AS), WHICH WAS CANCELLED ON 26 MAY 2000
SAE-AS-85080/1-2004 INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, POLYVINYL CHLORIDE, FLEXIBLE NON-CROSSLINKED -
FSC 5970
SAE-AS-85080/2-2004 INSULATION SLEEVING, ELECTRICAL, NONHEAT SHRINK, SILICONE RUBBER, FLEXIBLE - FSC 5970
SAE-AS-85080/3-2004 INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, POLYURETHANE FLEXIBLE - FSC 5970
SAE-AS-85080/4-2004 INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, CHLOROSULFONATED POLYETHYLENE FLEXIBLE - FSC
5970
SAE-AS-85080/5-2004 INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, POLYCHLOROPRENE - FSC 5970
SAE-AS-85080-2004 INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR - FSC 5970
SAE-AS-85188-2002 RIVETER, POWER, PNEUMATIC-HYDRAULIC BLIND RIVET INSTALLATION - FSC 5130
SAE-AS-85352/1-2002 INFLATOR ASSEMBLY KIT - FSC 4920
SAE-AS-85352/2-2002 INFLATOR ASSEMBLY REMOTE CONTROLLER ASSEMBLY - FSC 6685
SAE-AS-85352/3-2002 INFLATOR ASSEMBLY GAGE ELEMENTS - FSC 6685
SAE-AS-85352/4-2002 INFLATOR ASSEMBLY DUAL CHUCK STEM GAGE KIT - FSC 6685
SAE-AS-85352-2002 INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE, REMOTE CONTROL, DIRECT READING - FSC 4920
SAE-AS-85376-2002 STAND, SHIPBOARD, HELICOPTER MAINTENANCE - FSC 4920
SAE-AS-85421/10-2002 FITTING, ADAPTER, BEAM SEAL, 3000/4000 PSI, MALE TO FLARELESS - FSC 4730
SAE-AS-85421/11-2002 FITTING, UNION, BEAM SEAL, 3000/4000 PSI, MALE ENDS - FSC 4730
SAE-AS-85421/1-2002 FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE - FSC 4730
SAE-AS-85421/12-2002 FITTING, ELBOW, 90 DEGREE, BEAM SEAL, 3000/4000 PSI, MALE TO MALE - FSC 4730
SAE-AS-85421/13-2002 FITTING, ELBOW, 90 DEGREE, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS - FSC 4730
SAE-AS-85421/14-2002 FITTING, ELBOW, 90 DEGREE, BEAM SEAL, 3000/4000 PSI, MALE TO FEMALE - FSC 4730
SAE-AS-85421/15-2002 FITTING, ELBOW, 45 DEGREE, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS - FSC 4730
SAE-AS-85421/16-2002 FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON RUN, MALE ENDS - FSC 4730
SAE-AS-85421/17-2002 FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON BRANCH, MALE ENDS - FSC 4730
SAE-AS-85421/2-2002 FITTING END, STANDARD DIMENSIONS FOR BULKHEAD, DYNAMIC BEAM SEAL, MALE - FSC 4730
SAE-AS-85421/3-2002 FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS - FSC 4730
SAE-AS-85421/4-2002 FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH - FSC
4730
SAE-AS-85421/5-2002 FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH - FSC
4730
SAE-AS-85421/6-2005 FITTING, CROSS, BEAM SEAL, 3000/4000 PSI, MALE ENDS - FSC 4730
SAE-AS-85421/7-2005 FITTING ASSEMBLY, CROSS, BEAM SEAL, 3000/4000 PSI, 4 FEMALE ENDS - FSC 4730
SAE-AS-85421/8-2005 FITTING, CROSS, REDUCER, BEAM SEAL 3000/4000 PSI, 4 MALE ENDS - FSC 4730
SAE-AS-85421/9-2005 FITTING ASSEMBLY, CROSS, REDUCER BEAM SEAL, 3000/4000 PSI, 4 FEMALE ENDS - FSC 4730
SAE-AS-85421-1998 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR - FSC 4730
SAE-AS-85449/1-2003 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FUEL AND PETROLEUM BASED HYDRAULIC FLUID - FSC 5340
SAE-AS-85449/2-2003 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT - FSC 5340
SAE-AS-85449/3-2003 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, HIGH TEMPERATURE - FSC 5340
SAE-AS-85449/4-2003 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PTFE - FSC 5340
SAE-AS-85449/5-2003 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FIRE RESISTANCE, LOW SMOKE DENSITY AND TOXICITY - FSC 5340
SAE-AS-85449-2003 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, GENERAL SPECIFICATION FOR
SAE-AS-85485/10-2004 CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, SILVERCOATED HIGH-STRENGTH COPPER ALLOY CONDUCTOR, RADIO
FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT - FSC 6145
SAE-AS-85485/11-2004 CABLE, ELECTRIC, FILTER LINE, UNSHIELDED, UNJACKETED, MULTIPLE-COMPONENT, RADIO FREQUENCY ABSORPTIVE,
150 DEGREES C, 600-VOLT - FSC 6145
SAE-AS-85485/12-2004 CABLE, ELECTRIC, FILTER LINE, SHIELDED, JACKETED, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT -
FSC 6145
SAE-AS-85485/5-2004 CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY ABSORPTIVE,
150 DEGREES C, 600-VOLT - FSC 6145
SAE-AS-85485/6-2004 CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, RADIO
FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT - FSC 6145
SAE-AS-85485/7-2004 CABLE, ELECTRIC, FILTER LINE, UNSHIELDED, UNJACKETED, MULTIPLE-COMPONENT, RADIO FREQUENCY ABSORPTIVE, 150
DEGREES C, 600-VOLT - FSC 6145
SAE-AS-85485/8-2004 CABLE, ELECTRIC, FILTER LINE, SHIELDED, JACKETED, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT -
FSC 6145
SAE-AS-85485/9-2004 CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY, ABSORPTIVE,
150 DEGREES C, 600-VOLT - FSC 6145
SAE-AS-85485-2004 CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE - FSC 6145; AMENDMENT 1 - DECEMBER 2004
SAE-AS-85560/1-2004 BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, SELF-LUBRICATING, +250 DEGREES F - FSC 3120
SAE-AS-85560/2-2004 BEARING, FIBER REINFORCED PLASTIC, SLEEVE, FLANGED, SELF-LUBRICATING, +250 DEGREES F - FSC 3120
SAE-AS-85560-2004 BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR
SAE-AS-85643/2-1998 BIT, SCREWDRIVER, PHILLIPS, RIBBED, CRUCIFORM, LONG SHANK, EXTERNAL HEXAGON SHANK, POWER DRIVEN - FSC
5120
SAE-AS-8568-1999 BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD)) - FSC 6650; SHOULD
BE USED INSTEAD OF MIL-B-8568B, WHICH WAS CANCELLED ON 30 SEPTEMBER 1999
SAE-AS-85720/1-1998 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END
- FSC 4730
SAE-AS-85720-1998 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, GENERAL SPECIFICATION FOR - FSC
4730
SAE-AS-85731/1-2004 FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING - FSC 5340; AMENDMENT 1: 09/2004
SAE-AS-85731/2-2004 FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING, FORCE LIMITING - FSC 5340
SAE-AS-85731-2004 FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR - FSC 5340; AMENDMENT 1:
09/2004
SAE-AS-8581-2000 ENGINE; ROCKET, SOLID PROPELLANT 5 SECOND DURATION, 4500 POUNDS THRUST - FSC 2845; SHOULD BE USED INSTEAD OF
MIL-E-8581A(AS), WHICH WAS CANCELLED ON 26 MAY 2000
SAE-AS-8584-2002 BRAKE SYSTEMS, WHEEL, AIRCRAFT, DESIGN OF
SAE-AS-85848/1-2002 SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE - FSC 5970
SAE-AS-85848/2-2002 SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, POLYVINYLIDENE FLUORIDE, FLEXIBLE - FSC 5970
SAE-AS-85848-2002 SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR - FSC 5970
SAE-AS-85896-2002 LADDER, AIRCRAFT MAINTENANCE, ALUMINUM, THREE-WAY COMBINATION (STEP, STRAIGHT AND EXTENSION), GENERAL
SPECIFICATION FOR
SAE-AS-861-2006 MINIMUM GENERAL STANDARDS FOR OXYGEN SYSTEMS
SAE-AS-8660-1999 SILICONE COMPOUND NATO CODE NUMBER S-736 - FSC 6850; SHOULD BE USED INSTEAD OF MIL-S-8660C, WHICH WAS
CANCELLED ON 30 SEPTEMBER 1999
SAE-AS-8662-1999 KNIFE, HUNTING, SHEATHED, SURVIVAL, PILOT- - FSC 7340; SHOULD BE USED INSTEAD OF MIL-K-8662E(1), WHICH WAS
CANCELLED ON 30 AUGUST 1999
SAE-AS-8700-1999 INSTALLATION AND TEST OF ELECTRONIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR - FSC MISC; SHOULD BE
USED INSTEAD OF MIL-I-8700, WHICH WAS CANCELLED ON AUGUST 23, 1999
SAE-AS-870-1997 (R) WRENCHING CONFIGURATION, BI-HEXAGONAL (12 POINT) DRIVE, DESIGN STANDARD FOR - FSC 5120
SAE-AS-871-2001 MANUFACTURING AND INSPECTION STANDARDS FOR PREFORMED PACKINGS (O-RINGS)
SAE-AS-8712-1997 VALVE; AIR RELIEF, LOW PRESSURE
SAE-AS-8775-1998 HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES, GENERAL SPECIFICATION FOR - SHOULD BE USED INSTEAD OF
MIL-H-8775D, WHICH WAS CANCELLED ON 28 SEPTEMBER, 1998
SAE-AS-8791/1-1998 RERETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE, SINGLE TURN
SAE-AS-8791-2003 (R) HYDRAULIC AND PNEUMATIC RETAINERS (BACK-UP RINGS), POLYTETRAFLUOROETHYLENE (PTFE) RESIN
SAE-AS-8796-1998 HOSE, AIR DUCT, FLEXIBLE, AIRCRAFT
SAE-AS-880-1974 PROPELLER SHAFT END - FLANGED 4.250(107.95) BOLT CIRCLE
SAE-AS-8860-2006 LANDING GEAR STRUCTURAL REQUIREMENTS AS LISTED IN THE MIL-886X SERIES OF SPECIFICATIONS
SAE-AS-8879-2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
SAE-AS-889-1966 CALIBRATION SPARK PLUGS
SAE-AS-8905-1999 FITTINGS AND CARGO RINGS, TIE-DOWN, AIRCRAFT FLOOR - FSC 1670; SHOULD BE USED INSTEAD OF MIL-F-8905B(1),
WHICH WAS CANCELLED ON 07 SEPTEMBER 1999
SAE-AS-8914-2004 (R) BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION - FSC 3110; SHOULD BE USED INSTEAD OF MIL-B-
8914B(3), WHICH WAS CANCELLED ON 30 AUGUST 1999
SAE-AS-893-1995 FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON SIDE, EXTERNAL THREAD
SAE-AS-894-1995 FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON RUN, EXTERNAL THREAD
SAE-AS-895-1995 FITTING, ELBOW, 45 DEGREE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD - FSC 4730
SAE-AS-8952-2005 BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING - FSC 3110; SHOULD BE USED INSTEAD OF MIL-B-8952B,
WHICH WAS CANCELLED ON 30 AUGUST 1999
SAE-AS-896-1995 FITTING, NIPPLE, REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD - FSC 4730
SAE-AS-897-1995 FITTING, ELBOW, 90 DEGREE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD - FSC 4730
SAE-AS-8976-1999 BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL - FSC 3120; SHOULD BE USED INSTEAD OF MIL-B-8976(4), WHICH WAS
CANCELLED ON 30 AUGUST 1999
SAE-AS-8991-1999 GASKET, FUSELAGE LIGHT - COVER SCREW - FSC 5330
SAE-AS-9003-2001 INSPECTION AND TEST QUALITY SYSTEM
SAE-AS-9006-2003 DELIVERABLE AEROSPACE SOFTWARE SUPPLEMENT FOR AS9100A QUALITY MANAGEMENT SYSTEMS - AEROSPACE - REQUIREMENTS
FOR SOFTWARE (BASED ON AS9100A)
SAE-AS-9025-1999 CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .265 HOLE - FSC 8340
SAE-AS-903-1966 REMOTE TRIMMING ATTACHMENT FOR AIRCRAFT TURBINE ENGINE CONTROLS
SAE-AS-90328-2000 CABLE ASSEMBLY EXTERNAL ELECTRIC POWER, AIRCRAFT 115/200 VOLT, 400 HERTZ - FSC 6150
SAE-AS-90335-2002 CONNECTOR, RECEPTACLES, PLUGS, ADAPTOR, EL, EMBEDDED, PRINTED CIRCUIT BOARD LAMP LIGHTING PANELS - FSC 5935
SAE-AS-90347-2004 CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT 28 VOLT DC, OPERATING POWER - FSC 6150
SAE-AS-90362-2002 CONNECTOR, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 115/200 VOLT, 400 HERTZ - FSC 5935; AMENDMENT 1:
09/2004
SAE-AS-90376-2000 CAP, DUST, PLASTIC, ELECTRIC CONNECTOR - FSC 5340; TO BE USED INSTEAD OF MS 90376E; AMENDMENT 1 - DECEMBER
2004
SAE-AS-9047-1999 PIN - SPRING, STEEL, PHOSPHATE FINISH - FSC 5315
SAE-AS-90484-2004 GASKET, FLANGE MOUNT, CONNECTOR, ELECTRIC - FSC 5935
SAE-AS-9058-2003 RING - BACK-UP, BOSS CONNECTION, AMS 3652, AMS 3656, AMS 3660, AMS 3667 - FSC 5330
SAE-AS-90708-2001 RING, RETAINING, EXTERNAL, INTERLOCKING - FSC 5365
SAE-AS-90991-2003 NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM - UNS A92024 - FSC 5310
SAE-AS-91001-2003 NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES - UNS S30400 - FSC 5310
SAE-AS-9100-2004 QUALITY MANAGEMENT SYSTEMS - AEROSPACE - REQUIREMENTS - TECHNICALLY EQUIVALENT TO AECMA PREN 9100
SAE-AS-9101-2003 QUALITY MANAGEMENT SYSTEMS ASSESSMENT - TECHNICALLY EQUIVALENT TO AECMA PREN 9101
SAE-AS-9102-2004 (R) AEROSPACE FIRST ARTICLE INSPECTION REQUIREMENT - TECHNICALLY EQUIVALENT TO AECMA PREN 9102; SUPERSEDING
SAE AS 9012
SAE-AS-9103-2001 VARIATION MANAGEMENT OF KEY CHARACTERISTICS
SAE-AS-9104-2005 REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS
SAE-AS-9105-1998 PIN, STRAIGHT, HEADLESS, AMS5688, LOCK - FSC 5315
SAE-AS-91101-2003 (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI MIN,
.1900-32 UNJF-3A - FSC 5306
SAE-AS-9110-2003 QUALITY MAINTENANCE SYSTEMS - AEROSPACE - REQUIREMENTS FOR MAINTENANCE ORGANIZATIONS
SAE-AS-91111-2003 (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI MIN,
.2500-28 UNJF-3A - FSC 5306
SAE-AS-9111-2005 QUALITY MANAGEMENT SYSTEM ASSESSMENT FOR MAINTENANCE ORGANIZATIONS (BASED ON ISO 9001:2000)
SAE-AS-9112-2003 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24
UNJF-3A - FSC 5306
SAE-AS-9120-2002 QUALITY MANAGEMENT SYSTEMS - AEROSPACE REQUIREMENTS FOR STOCKIST DISTRIBUTORS
SAE-AS-9121-2003 AEROSPACE SERIES QUALITY SYSTEMS QUALITY SYSTEM ASSESSMENT APPLICABLE TO STOCKIST DISTRIBUTORS
SAE-AS-9131-2001 QUALITY SYSTEMS NON-CONFORMANCE DOCUMENTATION
SAE-AS-9132-2005 (R) DATA MATRIX QUALITY REQUIREMENTS FOR PARTS MARKING
SAE-AS-9133-2002 QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PARTS
SAE-AS-9141-2004 GASKET - METAL O-RING, .035 TUBE X .006 WALL, CRES - UNS S32100 - FSC 5330
SAE-AS-9142-2004 GASKET - METAL O-RING, .062 TUBE X .006 WALL, CRES - UNS S32100 - FSC 5330
SAE-AS-9144-2004 (R) GASKET - TYPE XX ENGINE ACCESSORY DRIVE - FSC 5330
SAE-AS-9158-1999 BOLT-MACHINE, STEEL, 12 POINT HEAD, .250-28, BLACK OXIDE - FSC 5306
SAE-AS-91601-2004 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN,
.3750-24 UNF-3A - FSC 5306
SAE-AS-916-1996 OXYGEN FLOW INDICATORS
SAE-AS-91641-2005 (R) PIN, STRAIGHT, HEADLESS, OVERSIZE, STEEL, UNS G10950 - FSC 5315
SAE-AS-91691-2003 (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400,
125 KSI MIN .1900-32 UNF-3A - FSC 5306
SAE-AS-91701-2003 (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400,
125 KSI MIN .2500-28 UNF-3A - FSC 5306
SAE-AS-91711-2003 (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400,
125 KSI MIN .3125-24 UNF-3A - FSC 5306
SAE-AS-91721-2003 (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400,
125 KSI MIN .3750-24 UNF-3A - FSC 5306
SAE-AS-919-1966 SHALLOW GROOVE SHAFTS AND LOCKING DEVICES FOR BEARING RETAINING SPANNER NUTS
SAE-AS-92001-2001 (R) NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM - UNS A92014 - FSC 5310; UNS A92014
SAE-AS-9201-2003 (R) NUT, PLAIN, HEXAGON, BOSS CONNECTION, SILVER PLATED, CRES-UNS S34700 - FSC 5310
SAE-AS-9202-2004 GASKET - METAL O-RING, .062 TUBE X .010 WALL, CRES - UNS S31200 - FSC 5330
SAE-AS-9203-2004 GASKET - METAL O-RING, .094 TUBE X .006 WALL, CRES - UNS S31200 - FSC 5330
SAE-AS-9204-2004 GASKET - METAL O-RING, .094 TUBE X .010 WALL, CRES - UNS S31200 - FSC 5330
SAE-AS-9205-2004 GASKET - METAL O-RING, .125 TUBE X .010 WALL, CRES - UNS S32100 - FSC 5330
SAE-AS-9207-2002 (R) SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675,
195 KSI MIN, .1640-36 UNJF-3A - FSC 5305
SAE-AS-9208-2003 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195
KSI MIN, .1900-32 UNJF-3A - FSC 5306
SAE-AS-9209-2002 (R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675,
195 KSI MIN, .2500-28 UNJF-3A - FSC 5306
SAE-AS-9210-2002 (R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675,
195 KSI MIN, .3125-24 UNJF-3A - FSC 5306
SAE-AS-9212-2002 (R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675,
195 KSI MIN, .4375-20 UNJF-3A - FSC 5306
SAE-AS-9216-2002 (R) SCREW, MACHINE - STEEL, DIFFUSED NICKEL - CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A - FSC 5305
SAE-AS-9217-2002 (R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL - CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
UNS K14675, 195 KSI MIN, .190-32 UNJF-3A - FSC 5306
SAE-AS-9218-2004 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS
K14675, 195 KSI MIN, .2500-28 UNJF-3A - FSC 5305
SAE-AS-9219-2003 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS
K14675, 195 KSI MIN, .3125-24 UNJF-3A - FSC 5306
SAE-AS-92-1949 CONES, FRONT, PROPELLER HUB
SAE-AS-9226-2004 WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 DEGREES F - SUPERSEDES AMS 9226A; FSC 9525
SAE-AS-9228-1999 BRACKET, ANGLE, 90 DEGREE .190 BOLT - FSC 5340
SAE-AS-9230-1998 BRACKET, ANGLE, 90 DEGREE .190 X .312 BOLT - FSC 5340; SHOULD BE USED FOR NEW DESIGN INSTEAD OF MS9230C,
WHICH WAS CANCELLED ON SEPTEMBER 28, 1998 |
