SAE-AS-5258/4-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, BOOT, STRAIN RELIEF AND SEALING, RIGHT ANGLE,

LOW PROFILE
SAE-AS-5258/5-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, BOOT, STRAIN RELIEF AND SEALING, STRAIGHT, LOW

PROFILE, MINIATURE
SAE-AS-5258/6-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, BOOT, STRAIN RELIEF AND SEALING, RIGHT ANGLE,

LOW PROFILE, MINIATURE
SAE-AS-5258/7-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, TRANSITION, STRAIN RELIEF AND SEALING, T
SAE-AS-5258/8-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, STRAIN RELIEF AND SEALING, Y
SAE-AS-5258/9-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, TRANSITION, STRAIN RELIEF AND SEALING, 1 TO 3
SAE-AS-5258-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN

RELIEF, GENERAL SPECIFICATION FOR
SAE-AS-5266-1997 FITTING, ADAPTER, STRAIGHT, FLARED, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-5267-1997 FITTING, ADAPTER, STRAIGHT, FLARELESS, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-5272-2005 (R) LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING PROCUREMENT SPECIFICATION
SAE-AS-5276/1-2000 PERFORMANCE STANDARD FOR CHILD RESTRAINT SYSTEMS IN TRANSPORT CATEGORY AIRPLANES
SAE-AS-5282-1998 TOOL STEEL RING FOR MAGNETIC PARTICLE INSPECTION
SAE-AS-5309-1997 FITTING END, SPHERICAL, 37 DEGREE FLARED TUBE CONNECTION DESIGN STANDARD - FSC 4730
SAE-AS-5310-1997 FITTING END, BULKHEAD, SPHERICAL, 37 DEGREE FLARED TUBE CONNECTION DESIGN STANDARD - FSC 4730
SAE-AS-5355/1-1998 COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 800 DEGREES F) - FSC 5340
SAE-AS-5355/2-1998 COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 6.25 FLANGE OD (-65 TO 250 DEGREES F) - FSC 5340
SAE-AS-5355/3-1998 COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 DEGREES F) - FSC 5340
SAE-AS-5355-2006 (R) COUPLINGS, CLAMP, GROOVED, V-BAND
SAE-AS-5356-2002 (R) COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR - SHOULD BE USED INSTEAD OF MIL-C-

85061B, WHICH WAS CANCELLED ON 24 AUGUST 1999
SAE-AS-5363-1999 ELECTROMECHANICAL POWER CONTROLLER/RELAY, GENERAL SPECIFICATION FOR
SAE-AS-5368-2003 ADAPTER, ASSEMBLY - PORT CONNECTION RING LOCKED TO SPHERICAL FLARED TUBE END, 3000 PSI - FSC 4730
SAE-AS-5370-2002 MULTI-TRANSMITTER BIDIRECTIONAL FIBER-OPTIC DATA BUS FOR DISTRIBUTED AIRCRAFT CONTROL SYSTEMS
SAE-AS-5371-1998 REFERENCE STANDARDS NOTCHED SHIMS FOR MAGNETIC PARTICLE INSPECTION
SAE-AS-5372-1997 FUSE, CURRENT LIMITER TYPE, AIRCRAFT
SAE-AS-53731-1999 FUSE HOLDER, BLOCK TYPE, AIRCRAFT - FSC 5920; SHOULD BE USED INSTEAD OF MIL-F-5373, WHICH WAS CANCELLED ON

31 AUGUST 1999
SAE-AS-5377-2000 NUT, SELF-LOCKING, 0.7500 THRU 1.5000 THREAD SIZES, UNS S66286, 160,000 PSI, 800 -, UNJ THREAD -

PROCUREMENT SPECIFICATION
SAE-AS-5379-1999 VALVES, SAFETY, CABIN AIR, GENERAL SPECIFICATION FOR
SAE-AS-5382/1-2003 CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 MICRO M GRADED INDEX, HERMETIC COATED, TIGHT BUFFER
SAE-AS-5382/2-2004 CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 MICRO M GRADED INDEX, NONHERMETIC, LOOSE TUBE - FSC 6010
SAE-AS-5382/3-2004 CABLE, FIBER OPTIC, SINGLE-MODE, 6/125/250 MICRO M, HERMETIC COATED, TIGHT BUFFER
SAE-AS-5382/4-2004 CABLE, FIBER OPTIC, SINGLE-MODE, 4.6/125/450 MICRO M, HERMETIC COATED, TIGHT BUFFER - FSC 6010
SAE-AS-5382/5-2004 CABLE, FIBER OPTIC, MULTI-MODE, 50/125/450 MICRO M, GRADED INDEX, HERMETIC COATED, TIGHT BUFFER - FSC 6010
SAE-AS-5382/6-2004 CABLE, FIBER OPTIC, MULTI-MODE, 200/230/500 MICRO M, STEP INDEX, TIGHT BUFFER - FSC 6010
SAE-AS-5382-2003 AEROSPACE CABLE, FIBER OPTIC
SAE-AS-5385-2004 CARGO RESTRAINT STRAPS - DESIGN CRITERIA AND TESTING METHODS
SAE-AS-5389-2001 PALLET LIFT TRUCK AND CONTAINER FORK POCKET INTERFACE
SAE-AS-5391-2002 HEALTH AND USAGE MONITORING SYSTEM ACCELEROMETER INTERFACE SPECIFICATION
SAE-AS-5392-2002 HEALTH AND USAGE MONITORING SYSTEM, ROTATIONAL SYSTEM INDEXING SENSOR SPECIFICATION
SAE-AS-5393-2002 HEALTH AND USAGE MONITORING SYSTEM, BLADE TRACKER INTERFACE SPECIFICATION
SAE-AS-5394-2002 HEALTH AND USAGE MONITORING SYSTEM ADVANCED MULTIPOINT INTERFACE SPECIFICATION
SAE-AS-5402-2001 DESIGN AND PERFORMANCE CRITERIA AIRCRAFT CRASH AXES
SAE-AS-5406-2005 FITTING, UNION, TUBE, .375 BULKHEAD - FSC 4730; SHOULD BE USED INSTEAD OF AN832 AND MS24393 THAT WERE

CANCELLED ON 11 FEBRUARY 2000
SAE-AS-5419/1-2003 WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP);

NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C
SAE-AS-5419/2-2003 WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP);

NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 DEGREES C
SAE-AS-5419/3-2003 WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE

(KN) THERMOCOUPLE EXTENSION, 260 DEGREES C
SAE-AS-5419/4-2003 WIRE, THERMOCOUPLE, CROSSLINKED POLYALENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN)

THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 DEGREES C
SAE-AS-5419/5-2003 WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM

(KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREES C
SAE-AS-5419/6-2003 WIRE, THERMOCOUPLE, FP/POLYMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN)

THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 DEGREES C
SAE-AS-5419/7-2003 WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN)

THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 DEGREES C
SAE-AS-5419-2003 CABLE, THERMOCOUPLE EXTENSION, SHIELDED AND UNSHIELDED
SAE-AS-54-1941 TACHOMETER DRIVE - TYPE I
SAE-AS-5420-2006 (R) HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
SAE-AS-5421-2005 HOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS, 125 PSI, POTABLE WATER - FSC 4720
SAE-AS-5422-2005 HOSE ASSEMBLY, LINED SILICONE, HEATED, FIXED CAVITY, 125 PSI, POTABLE WATER - FSC 4720
SAE-AS-5423-2005 HOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER - FSC 4720
SAE-AS-5439-1999 ADAPTER REDUCER, BEAM SEAL - PORT CONNECTION, RING LOCKED DESIGN, INSTALLATION AND REMOVAL OF
SAE-AS-5440-1998 HYDRAULIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION REQUIREMENTS FOR - FSC 1650; SHOULD BE USED INSTEAD OF

MIL-H-5440H, WHICH WAS CANCELLED ON 13 SEPTEMBER 1999
SAE-AS-5443-1999 WRENCHING ELEMENT, SPLINE DRIVE - DIMENSIONS FOR - FSC 5306
SAE-AS-5447-2000 ACCEPTANCE CRITERIA FOR NUTS - MAGNETIC PARTICLE, FLUORESCENT PENETRANT, AND VISIBLE PENETRANT EXAMINATION
SAE-AS-5449-2003 FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD - FSC 4730
SAE-AS-5452-2000 NIGHT VISION GOGGLES (NVG) COMPATIBLE LIGHTING FOR CIVIL AIRCRAFT
SAE-AS-5457-2002 AEROSPACE STANDARD FOR HAND-HELD WIRE STRIPPER TOOLS
SAE-AS-5458-2003 HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-5459-2003 HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 45 DEGREE - FSC 4720
SAE-AS-5460-2003 HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 90 DEGREE - FSC 4720
SAE-AS-5461-2003 HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45 DEGREE TO 45 DEGREE - FSC 4720
SAE-AS-5462-2003 HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45 DEGREE TO 90 DEGREE - FSC 4720
SAE-AS-5463-2003 HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 90 DEGREE TO 90 DEGREE - FSC 4720
SAE-AS-5488-2002 REGIONAL AIRCRAFT TOWBAR ATTACH FITTING INTERFACE
SAE-AS-5491-2002 CALCULATION OF ELECTRON VACANCY NUMBER IN SUPERALLOYS
SAE-AS-5498-2001 MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR INFLIGHT ICING DETECTION SYSTEMS
SAE-AS-5502-2003 STANDARD REQUIREMENTS FOR AEROSPACE SEALANTS
SAE-AS-5503-2004 HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER - FSC 4720
SAE-AS-5505-2001 REQUIREMENTS FOR ACCREDITATION OF TESTING LABORATORIES FOR ORGANIC COATINGS
SAE-AS-5506-2004 ARCHITECTURE ANALYSIS & DESIGN LANGUAGE (AADL)
SAE-AS-5528-2005 LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING
SAE-AS-5537-2004 WEATHER SUPPORT TO DEICING DECISION MAKING (WSDDM) WINTER WEATHER NOWCASTING SYSTEM - CONTAINS COLOR
SAE-AS-5550-2005 FITTING ASSEMBLY, RING LOCKED, ADAPTER, FLARELESS TO PORT, EXTRA FINE THREADS, 5080 PSI - FSC 4730
SAE-AS-5551-2005 FITTING ASSEMBLY - 24-?CONE FLARELESS PER AS5827, 5080 PSI, PORT CONNECTION PORT PREPARATION, INSTALLATION

AND REMOVAL OF AS5550 AND AS5865
SAE-AS-5586-2005 AEROSPACE GENERAL REQUIREMENTS FOR HYDRAULIC SYSTEM RESERVOIRS
SAE-AS-5587-2000 CLAMP, LOOP, PLAIN, SUPPORT, AIRCRAFT - FSC 5340
SAE-AS-5590/1-2005 CONNECTOR, FIBER OPTIC, CIRCULAR, ENVIRONMENT RESISTANT, REMOVEABLE TERMINI - FSC 5935
SAE-AS-5590-2004 CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT,

REMOVABLE TERMINI, GENERAL SPECIFICATION FOR - AMENDMENT 1 - JULY 2004
SAE-AS-55941/1-2004 SWITCH, TOGGLE, MAGNETIC HOLD-IN SPDT - FSC 5930
SAE-AS-55941/2-2004 SWITCH, TOGGLE, MAGNETIC HOLD-IN, DPDT - FSC 5930
SAE-AS-55941/3-2004 SWITCH, TOGGLE, MAGNETIC HOLD-IN, DP3T - FSC 5930
SAE-AS-55941/6-2004 SWITCH, TOGGLE, MAGNETIC HOLD-IN, DP3T LEVER LOCK - FSC 5930
SAE-AS-55941-2004 SWITCHES, TOGGLE, ELECTRICALLY HELD, SEALED, GENERAL SPECIFICATION FOR - FSC 5930
SAE-AS-5604-1999 COMPASS; MAGNETIC, PILOT- STANDBY - FSC 6605; SHOULD BE USED INSTEAD OF MIL-C-5604B, WHICH WAS CANCELLED

ON 31 AUGUST 1999
SAE-AS-5609-2004 AIRCRAFT/STORE COMMON INTERFACE CONTROL DOCUMENT FORMAT STANDARD
SAE-AS-5620-2006 TITANIUM HYDRAULIC TUBING, TI-3AL-2.5V COLD WORKED AND STRESS RELIEVED, UP TO 35,000 KPA (5080 PSI),

REQUIREMENTS FOR QUALIFICATION TESTING AND CONTROL
SAE-AS-5635-2005 MESSAGE BOARDS (DEICING FACILITIES)
SAE-AS-5643/1-2004 S400 COPPER MEDIA INTERFACE CHARACTERISTICS OVER EXTENDED DISTANCES
SAE-AS-5643-2004 IEEE -1394B INTERFACE REQUIREMENTS FOR MILITARY AND AEROSPACE VEHICLE APPLICATIONS
SAE-AS-5652-2005 10 MEGABIT/SEC NETWORK CONFIGURATION DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS
SAE-AS-567-1994 SAFETY CABLE, SAFETY WIRE, KEY WASHERS, AND COTTER PINS FOR PROPULSION SYSTEMS, GENERAL PRACTICES FOR USE OF
SAE-AS-56761-1999 SPLICING; CABLE TERMINAL, PROCESS FOR, AIRCRAFT - FSC 5130; SHOULD BE USED INSTEAD OF MIL-S-5676, WHICH WAS

CANCELLED ON 29 OCTOBER 1999
SAE-AS-568-2001 AEROSPACE SIZE STANDARD FOR O-RINGS
SAE-AS-5692-2004 ARC FAULT CIRCUIT BREAKER ( AFCB), AIRCRAFT, TRIP-FREE SINGLE PHASE 115 VAC, 400 HZ - CONSTANT FREQUENCY
SAE-AS-5756/1-2004 CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, NON-OZONE RESISTANT - FSC 6145
SAE-AS-5756/2-2004 CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, OZONE RESISTANT - FSC 6145
SAE-AS-5756/3-2004 CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR - FSC 6145; AMENDMENT 1 - JULY 2004
SAE-AS-5756/4-2004 CABLE, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR, OZONE RESISTANT - FSC 6145; AMENDMENT 1 - JULY

2004
SAE-AS-5756/5-2004 CABLE, 3-PHASE POWER, ELECTRIC, PORTABLE, MULTICONDUCTOR, 90 DEGREE C, 600V, OZONE RESISTANT, SPLIT

NEUTRAL - FSC 6145
SAE-AS-5756/6-2004 CABLE, 3-PHASE POWER, ELECTRIC, PORTABLE, MULTICONDUCTOR, 90 DEGREE C, 600V, OZONE RESISTANT, SPLIT PHASE

- FSC 6145
SAE-AS-5756-2004 CABLE, POWER, ELECTRICAL, PORTABLE GENERAL SPECIFICATION FOR - AMENDMENT 1 - JULY 2004
SAE-AS-5778-1997 COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR
SAE-AS-5780-2005 (R) SPECIFICATION FOR AERO AND AERO-DERIVED GAS TURBINE ENGINE LUBRICANTS
SAE-AS-5792-2006 FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC - FSC 4730
SAE-AS-5793-2006 FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC - FSC 4730
SAE-AS-58091/1-1999 CIRCUIT BREAKER, AIRCRAFT, TRIP-FREE PUSH PULL, TYPE I, DUAL-SAFTEY, -55 THRU +121 DEGREES C - FSC 5925;

SHOULD BE USED INSTEAD OF MIL-C-5809/1, WHICH WAS CANCELLED ON 13 SEPTEMBER 1999
SAE-AS-58091-1999 CIRCUIT BREAKERS, TRIP-FREE, AIRCRAFT GENERAL SPECIFICATION FOR - FSC 5925; AMENDMENT 1 - NOVEMBER 2004
SAE-AS-5813-1998 TUBE - PITOT, ELECTRICALLY HEATED
SAE-AS-5823-1998 CARD-COMPASS CORRECTION - FSC 6610
SAE-AS-5827-2005 FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD - FSC 4730
SAE-AS-5828-2005 FITTING END, BULKHEAD, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD - FSC 4730
SAE-AS-5857-2005 GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS
SAE-AS-5860-2006 RETAINERS (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, STATIC GLAND
SAE-AS-5861-2005 RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, STATIC GLAND -

FSC 5330
SAE-AS-5863-2006 FITTING END, 24-?CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD - FSC 4730
SAE-AS-5864-2006 FITTING END, BULKHEAD, 24-?CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD - FSC 4730
SAE-AS-5865-2005 FITTING REDUCER ASSEMBLY, RING LOCKED, ADAPTER, FLARELESS TO PORT, EXTRA FINE THREADS, 5080 PSI - FSC 4730
SAE-AS-5868-2006 FITTING ASSEMBLY, ADAPTER, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5869-2006 FITTING ASSEMBLY, UNION, 3 HOLE FLANGE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5877-2001 DETAILED SPECIFICATION FOR AIRCRAFT PRESSURE REFUELING NOZZLE
SAE-AS-5878-2005 NUT, SELF-LOCKING, NICKEL ALLOY, UNS N07001, 1400 DEGREES F, 180,000 PSI, UNJ THREAD PROCUREMENT

SPECIFICATION
SAE-AS-5900-2003 STANDARD TEST METHOD FOR AERODYNAMIC ACCEPTANCE OF SAE AMS 1424 AND SAE AMS 1428 AIRCRAFT DEICING/ANTI-ICING

FLUIDS
SAE-AS-5901-2003 WATER SPRAY AND HIGH HUMIDITY ENDURANCE TEST METHODS FOR SAE AMS 1424 AND SAE AMS 1428 AIRCRAFT

DEICING/ANTI-ICING FLUIDS
SAE-AS-5902-2002 INSTALLATION OF EXTERNALLY SWAGED FITTINGS
SAE-AS-5927-2005 BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE V, ANTI-FRICTION, CORROSION

RESISTANT NITROGEN (CREN) STEEL, INCH - FSC 3110
SAE-AS-5928-2005 BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, ANTI-FRICTION, CORROSION

RESISTANT NITROGEN (CREN) STEEL, INCH - FSC 3110
SAE-AS-5942-2004 MARKING OF ELECTRICAL INSULATING MATERIALS
SAE-AS-5944-1999 SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR - FSC 1730; SHOULD BE USED INSTEAD OF MIL-S-5944C, WHICH WAS

CANCELLED ON 1 JULY 1999
SAE-AS-5951-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 - (135 -),

AIRCRAFT HYDRAULIC SYSTEMS
SAE-AS-595-2003 (R) AEROSPACE - CIVIL TYPE VARIABLE DELIVERY, PRESSURE COMPENSATED, HYDRAULIC PUMP
SAE-AS-5952-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 -, 5080 PSI, FLARELESS, TITANIUM

FITTINGS, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-5953-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 -, 5080 PSI, FLARELESS, TITANIUM

FITTINGS, STRAIGHT TO 45-?- FSC 4720
SAE-AS-5954-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 -, 5080 PSI, FLARELESS, TITANIUM

FITTINGS, STRAIGHT TO 90-?- FSC 4720
SAE-AS-5955-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 -, 5080 PSI, FLARELESS, TITANIUM

FITTINGS, 45-?TO 45-?- FSC 4720
SAE-AS-5956-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 -, 5080 PSI, FLARELESS, TITANIUM

FITTINGS, 45-?TO 90-?- FSC 4720
SAE-AS-5957-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 -, 5080 PSI, FLARELESS, TITANIUM

FITTINGS, 90-?TO 90-?- FSC 4720
SAE-AS-5958-2006 FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM 5080 PSI (35,000 KPA), SPECIFICATION

FOR
SAE-AS-5959-2006 AXIALLY SWAGED FITTINGS, INSTALLATION AND INSPECTION PROCEDURE
SAE-AS-5960-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35 000 KPA), 400 DEGREES F (204

DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
SAE-AS-5961-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO

STRAIGHT - FSC 4720
SAE-AS-5962-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO

45 DEGREES ELBOW - FSC 4720
SAE-AS-5963-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO

90 DEGREES ELBOW - FSC 4720
SAE-AS-5964-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREES

ELBOW TO 45 DEGREES ELBOW - FSC 4720
SAE-AS-5965-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREE

ELBOW TO 90 DEGREE ELBOW - FSC 4720
SAE-AS-5966-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 90 DEGREE

ELBOW TO 90 DEGREE ELBOW - FSC 4720
SAE-AS-5969-2006 FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5970-2006 FITTING ASSEMBLY, ELBOW, 90-? AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5971-2006 FITTING ASSEMBLY, ELBOW, 45-? AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5972-2006 FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5973-2006 FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5974-2006 FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5975-2006 FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5976-2006 FITTING ASSEMBLY, 90-? FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5977-2006 FITTING ASSEMBLY, 90-? MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5978-2006 FITTING ASSEMBLY, 45-? FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5979-2006 FITTING ASSEMBLY, 45-? MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI - FSC 4730
SAE-AS-5986-2005 FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/ - FSC 4730
SAE-AS-5994-2000 PUMP UNITS, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY
SAE-AS-6011-1999 CYLINDERS, CARBON DIOXIDE FILLED, TECHNICAL - FSC 4220; SHOULD BE USED INSTEAD OF MIL-C-601G(1), WHICH WAS

CANCELLED ON 07 SEPTEMBER 1999
SAE-AS-6026-1998 CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM - FSC 1680
SAE-AS-603-2004 IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES - SUPERSEDES SAE ARP 603F
SAE-AS-6038-1998 BEARINGS, BALL, BELLCRANK, ANTIFRICTION, AIRFRAME - FSC 3110
SAE-AS-6039-2004 (R) BEARINGS, BALL, ROD END, DOUBLE ROW, SELF-ALIGNING
SAE-AS-604-2000 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC
SAE-AS-604-SUP-1-1998 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT,

HYDRAULIC AND PNEUMATIC (SUPPLEMENT 1)
SAE-AS-6053-2001 TESTS, IMPACT, SHOCK ABSORBER LANDING GEAR, AIRCRAFT - REPLACES MIL-T-6053
SAE-AS-6054-2001 DRUM, METAL - SHIPPING AND STORAGE
SAE-AS-6055-2001 DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) - FSC 8110
SAE-AS-611-1999 (R) HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
SAE-AS-6136-1998 CONDUIT, ELECTRICAL, FLEXIBLE, SHIELDED, ALUMINUM ALLOY FOR AIRCRAFT INSTALLATIONS - FSC 5975
SAE-AS-614-2000 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC

AND PNEUMATIC
SAE-AS-6144-1997 SOUND AND THERMAL INSULATION FOR AIRCRAFT GENERAL SPECIFICATION FOR THE INSTALLATION OF
SAE-AS-614-SUP-1-1998 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY,

HYDRAULIC AND PNEUMATIC (SUPPLEMENT 1)
SAE-AS-620-2000 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE,

AIRCRAFT
SAE-AS-620-SUP-1-1998 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM

PRESSURE, AIRCRAFT (SUPPLEMENT 1)
SAE-AS-621-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO STRAIGHT, HEAVYWEIGHT - FSC 4720
SAE-AS-622-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO 45 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-623-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO 90 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-624-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 45 DEGREE TO 45 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-625-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 45 DEGREE TO 90 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-626-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 90 DEGREE TO 90 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-627-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARED, STRAIGHT TO STRAIGHT, HEAVYWEIGHT - FSC 4720
SAE-AS-628-2001 HOSE ASSEMBLY, 3000 PSI,PTFE, FLARED, STRAIGHT TO 45 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-629-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARED, STRAIGHT TO 90 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-630-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARED, 45 DEGREE TO 45 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-6302-1999 TRANSMITTER, PRESSURE, FUEL, 0-600 PSI - FSC 6620; SHOULD BE USED INSTEAD OF MIL-T-6302B(2), WHICH WAS

CANCELLED ON 16 AUGUST 1999
SAE-AS-631-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARED, 45 DEGREE TO 90 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-632-2001 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARED, 90 DEGREE TO 90 DEGREE, HEAVYWEIGHT - FSC 4720
SAE-AS-6370-2002 WIRE, ELECTRICAL, INSULATED, ANTENNA - FSC 6145
SAE-AS-639-1994 HOSE, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, HYDRAULIC, 450 DEGREES F - FSC 4720
SAE-AS-6399-1999 HOSE, RUBBER, WIRE-WOUND, SYNTHETIC, ICE ELIMINATING SYSTEM - SHOULD BE USED INSTEAD OF MIL-H-6399B, WHICH

WAS CANCELLED ON 1 JULY 1999
SAE-AS-6439-1999 HOSE, RUBBER, AIRCRAFT PAINT FINISH REMOVER - FSC 4720
SAE-AS-6451-1999 SHIELDS, PROTECTIVE, AIRCRAFT AND MISSILES - FSC 1730; SHOULD BE USED INSTEAD OF MIL-S-6451E, WHICH WAS

CANCELLED ON 1 JULY 1999
SAE-AS-647-2003 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO STRAIGHT -

FSC 4720
SAE-AS-6480-1997 TIE DOWN, CARGO, AIRCRAFT, TYPE C-2
SAE-AS-648-2003 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 45 DEGREE -

FSC 4720
SAE-AS-649-2003 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 90 DEGREE -

FSC 4720
SAE-AS-650-2003 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 45 DEGREE TO 45 DEGREE -

FSC 4720
SAE-AS-651-2003 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 45 DEGREE TO 90 DEGREE -

FSC 4720
SAE-AS-652-2003 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 90-?TO 90-?- FSC 4720
SAE-AS-654-1964 CABLE, SPECIAL PURPOSE, ELECTRICAL: WIRE, ELECTRICAL (IGNITION, HIGH-TENSION)
SAE-AS-665-1960 TAPERED AXLE COLLAR DIMENSIONS
SAE-AS-678-1989 GASKET - 18MM FOLDED STEEL AIRCRAFT
SAE-AS-681-1999 GAS TURBINE ENGINE STEADY -STATE AND TRANSIENT PERFORMANCE PRESENTATION FOR DIGITAL COMPUTER PROGRAMS
SAE-AS-683-2001 INSTALLATION PROCEDURES AND TORQUES FOR FLUID CONNECTIONS
SAE-AS-685-1979 PILOTED RING SEAL FLUID CONNECTION BOSSES
SAE-AS-686-2001 PILOTED RING SEAL TUBE SWIVEL CONNECTION ASSEMBLY
SAE-AS-6882-1999 WATER REPELLENT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC - FSC 6850; SHOULD BE USED INSTEAD OF MIL-W-6882F,

WHICH WAS CANCELLED ON 30 SEPTEMBER 1999
SAE-AS-692-1972 IGNITER, SPARK, AERONAUTICAL ENGINE (HIGH TENSION)
SAE-AS-7001-1990 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM DESCRIPTION
SAE-AS-7002-1990 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) RULES FOR IMPLEMENTATION
SAE-AS-7003-2006 (R) NADCAP PROGRAM REQUIREMENTS
SAE-AS-701-1977 BOSS DESIGN FOR SPARK IGNITERS
SAE-AS-707-1988 THERMAL SENSITIVE INFLATION PRESSURE RELEASE DEVICES FOR TUBELESS AIRCRAFT WHEELS
SAE-AS-708-1990 TOP VISUAL QUALITY (TVQ) O-RING PACKINGS AND GASKETS - SURFACE INSPECTION GUIDE AND ACCEPTANCE STANDARD
SAE-AS-70991-1999 TERMINALS: LUG AND SPLICE, CRIMP STYLE, ALUMINUM, FOR ALUMINUM AIRCRAFT WIRE - FSC 5940; SHOULD BE USED

INSTEAD OF MIL-T-7099, WHICH WAS CANCELLED ON 27 SEPTEMBER 1999
SAE-AS-7101-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS

TEST LABORATORY ACCREDITATION PROGRAM
SAE-AS-7102/1-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR BRAZING
SAE-AS-7102-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR HEAT TREATING
SAE-AS-7103-1993 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) REQUIREMENTS FOR ACCREDITATION OF

PASS THROUGH DISTRIBUTORS
SAE-AS-7104-1996 NADCAP REQUIREMENTS FOR ACCREDITATION OF FULL DISTRIBUTORS
SAE-AS-71051-1999 PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT - DESIGN AND INSPECTION STANDARD - FSC 4730
SAE-AS-7106/1-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR THE CONTROL OF

DELIVERABLE PRODUCTION SOFTWARE
SAE-AS-7106/2-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR CORRECTIVE ACTION AND

DISPOSITION SYSTEM FOR NONCONFORMING MATERIAL
SAE-AS-7106/3-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM QUALITY ASSURANCE PROGRAM REQUIREMENTS -

PROCUREMENT
SAE-AS-7106/5-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM SELF-RELEASE AGREEMENTS - REQUIREMENTS
SAE-AS-7106-1994 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM QUALITY PROGRAM REQUIREMENTS
SAE-AS-7107-1994 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS
SAE-AS-7108/1-1998 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR PAINTING AND DRY FILM

COATINGS
SAE-AS-7108-2003 NADCAP AUDIT CRITERIA FOR CHEMICAL PROCESSING - SUPERSEDES SAE AS 7108/2A
SAE-AS-7109/1-2005 (R) NADCAP REQUIREMENTS FOR THERMAL SPRAY
SAE-AS-7109/2-2005 (R) NADCAP REQUIREMENTS FOR VAPOR DEPOSITED COATINGS
SAE-AS-7109/3-2005 (R) NADCAP REQUIREMENTS FOR DIFFUSION COATING PROCESSES
SAE-AS-7109/4-2005 (R) NADCAP REQUIREMENTS FOR STRIPPING OF COATED MATERIAL
SAE-AS-7109/5-2005 (R) NADCAP REQUIREMENTS FOR COATING EVALUATION LABORATORY PRACTICES
SAE-AS-7109/6-2005 (R) NADCAP REQUIREMENTS FOR PLATING OF COATED PARTS
SAE-AS-7109/7-2005 (R) NADCAP REQUIREMENTS FOR HEAT TREATING FOR SUPPLIERS OF COATINGS
SAE-AS-7109-2005 (R) NADCAP REQUIREMENTS FOR COATINGS
SAE-AS-7110/10-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FOUNDRY IN-PROCESS

WELDING OF CASTINGS
SAE-AS-7110/11-1995 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR GAS ARC FUSION SPOT

WELDING
SAE-AS-7110/1-2003 NADCAP REQUIREMENTS FOR BRAZING (TORCH AND INDUCTION)
SAE-AS-7110/2-2003 NADCAP REQUIREMENTS FOR FLASH WELDING
SAE-AS-7110/3-2003 NADCAP REQUIREMENTS FOR ELECTRON BEAM WELDING
SAE-AS-7110/4-2003 NADCAP REQUIREMENTS FOR RESISTANCE WELDING (SPOT, SEAM, PROJECTION)
SAE-AS-7110/5-2003 NADCAP REQUIREMENTS FOR FUSION WELDING
SAE-AS-7110/6-2003 NADCAP REQUIREMENTS FOR LASER WELDING
SAE-AS-7110/7-2003 NADCAP REQUIREMENTS FOR ROTATIONAL FRICTION/INERTIA WELDING
SAE-AS-7110/8-2003 NADCAP REQUIREMENTS FOR DIFFUSION WELDING
SAE-AS-7110/9-2003 NADCAP REQUIREMENTS FOR PERCUSSION STUD WELDING
SAE-AS-7110-2003 NADCAP REQUIREMENTS FOR WELDING/BRAZING
SAE-AS-7112/1-1997 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM HOSE MANUFACTURING REQUIREMENTS
SAE-AS-7112/2-1997 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FITTINGS AND OTHER

MACHINED COMPONENTS
SAE-AS-7112/3-2003 NADCAP REQUIREMENTS FOR COUPLINGS AND FORMED SHEET METAL COMPONENTS
SAE-AS-7112/4-1997 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR HOSE/TUBE ASSEMBLY
SAE-AS-7112/6-2004 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM TITANIUM 3AL-2.5V ALLOY, SEAMLESS

HYDRAULIC TUBING MANUFACTURING REQUIREMENTS
SAE-AS-7112-1997 NATIONAL AEROSPACE AAND DEFENSE CONTRACTORS ACCREEDITATION PROGRAM; REQUIREMENTS FOR FLUID SYSTEM COMPONENTS
SAE-AS-7113-1997 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FASTENER MANUFACTURING
SAE-AS-7114/1-1997 NADCAP REQUIREMENTS FOR NONDESTRUCTIVE TESTING FACILITY PENETRANT SURVEY - SUPERSEDING AS 7100/1A
SAE-AS-7114/2-1997 NADCAP REQUIREMENTS FOR NONDESTRUCTIVE TESTING MAGNETIC PARTICLE SURVEY - SUPERSEDING AS 7100/1A
SAE-AS-7114/3-1997 NADCAP REQUIREMENTS FOR NONDESTRUCTIVE TESTING FACILITY ULTRASONIC SURVEY - SUPERSEDING AS 7100/1A
SAE-AS-7114/4-1997 NADCAP REQUIREMENTS FOR NONDESTRUCTIVE TESTING FACILITY RADIOGRAPHY - SUPERSEDING AS 7100/1A
SAE-AS-7114-1997 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONDESTRUCTIVE TESTING -

SUPERSEDING AS 7100/1A
SAE-AS-7115-2001 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELASTOMER SEALS
SAE-AS-7116/1-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTROCHEMICAL

MACHINING (ECM)
SAE-AS-7116/2-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTROCHEMICAL GRINDING

(ECG)
SAE-AS-7116/3-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTRICAL DISCHARGE

MACHINING (EDM)
SAE-AS-7116/4-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR LASER BEAM MACHINING

(LBM)
SAE-AS-7116-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONCONVENTIONAL MACHINING
SAE-AS-7117-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR SHOT PEENING, PEEN

FORMING, GLASS BEAD PEENING
SAE-AS-7118/1-2004 NADCAP REQUIREMENTS FOR PREPREG/ADHESIVE BONDING
SAE-AS-7118/2-2004 NADCAP REQUIREMENTS FOR METAL BONDING
SAE-AS-7118/3-2004 NADCAP REQUIREMENTS FOR CORE PROCESSING
SAE-AS-7118-2004 NADCAP REQUIREMENTS FOR COMPOSITES
SAE-AS-7119-2005 NADCAP AEROSPACE STANDARD FOR ELECTRONICS PRINTED CIRCUIT BOARDS
SAE-AS-714-1980 AIRCRAFT HYDRAULIC START MOTOR
SAE-AS-7200/1-1994 NATIONAL AEROSPACE AND DEFENCE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) AUDIT AND INSPECTION PROCEDURES

AND CHECKLISTS FOR THE SEALANT MANUFACTURERS ACCREDITATION PROGRAM
SAE-AS-7201-1991 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) REQUIREMENTS FOR ACCREDITATION OF

PASS-THRU DISTRIBUTORS