SAE-AS-4643-1992 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 PSI, FLARED, STRAIGHT TO 45
DEGREES, CRES FITTINGS - FSC 4720
SAE-AS-4644-1992 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 PSI, FLARED, STRAIGHT TO 90
DEGREES, CRES FITTINGS - FSC 4720
SAE-AS-4645-1992 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 PSI, FLARED, 45 DEGREES TO 45
DEGREES, CRES FITTINGS - FSC 4720
SAE-AS-4646-1992 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 PSI, FLARED, 45 DEGREES TO 90
DEGREES, CRES FITTINGS - FSC 4720
SAE-AS-4647-1992 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 PSI, FLARED, 90 DEGREES TO 90
DEGREES, CRES FITTINGS - FSC 4720
SAE-AS-4658-1992 FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD - FSC 4730
SAE-AS-4659-1993 FITTING END, BULKHEAD, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD - FSC 4730
SAE-AS-4660-1994 NUT, SHORT FLARELESS - FSC 4730
SAE-AS-4661-1994 FITTING ASSEMBLY, CAP, SHORT FLARELESS - FSC 4730
SAE-AS-4662-1994 FITTING, PLUG, SHORT FLARELESS - FSC 4730
SAE-AS-4663-1994 FITTING, UNION, SHORT FLARELESS - FSC 4730
SAE-AS-4664-1994 FITTING, UNION, BULKHEAD, SHORT FLARELESS - FSC 4730
SAE-AS-4665-1994 FITTING, ADAPTER, UNION AND REDUCER, SHORT FLARELESS TO BOSS - FSC 4730
SAE-AS-4666-1994 FITTING, ELBOW, 45 DEGREES, BULKHEAD, SHORT FLARELESS - FSC 4730
SAE-AS-4667-1992 ELBOW ASSEMBLY, 45 DEGREES, RETAINED NUT, SHORT FLARELESS
SAE-AS-4668-1994 FITTING, ELBOW, 90 DEGREES, SHORT FLARELESS - FSC 4730
SAE-AS-4669-1994 FITTING, ELBOW, 90 DEGREES, BULKHEAD, SHORT FLARELESS - FSC 4730
SAE-AS-4670-1992 ELBOW ASSEMBLY, 90 DEGREES, RETAINER NUT, SHORT FLARELESS - FSC 4730
SAE-AS-4671-1994 FITTING, TEE, SHORT FLARELESS - FSC 4730
SAE-AS-4672-1994 FITTING, TEE, BULKHEAD ON RUN, SHORT FLARELESS - FSC 4730
SAE-AS-4673-1994 FITTING, TEE, BULKHEAD ON SIDE, SHORT FLARELESS - FSC 4730
SAE-AS-4674-1992 TEE ASSEMBLY, RETAINED NUT ON RUN, SHORT FLARELESS - FSC 4730
SAE-AS-4675-1992 TEE ASSEMBLY, RETAINED NUT ON SIDE, SHORT FLARELESS - FSC 4730
SAE-AS-4676-1994 FITTING, TEE, BULKHEAD AND BOSS ON RUN, SHORT FLARELESS - FSC 4730
SAE-AS-4677-1994 FITTING, TEE, BULKHEAD ON RUN, BOSS ON SIDE, SHORT FLARELESS - FSC 4730
SAE-AS-4678-1997 NUT, BULKHEAD, SHORT FLARELESS
SAE-AS-4679-1993 WASHER, FLAT, SHORT FLARELESS - FSC 4730
SAE-AS-4680-1994 FITTING, UNION, REDUCER, SHORT FLARELESS AND FLARELESS TO BOSS - FSC 4730
SAE-AS-4681-1994 FITTING, UNION, REDUCER/EXPANDER BULKHEAD, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4682-1994 FITTING, ELBOW, 45 DEGREES, REDUCER, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4683-2003 (R) FITTING, ELBOW, 45 DEGREE, REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4684-1997 FITTING ASSEMBLY, ELBOW, 45 DEGREE, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT
SAE-AS-4685-1994 FITTING, ELBOW, 90 DEGREES, REDUCER, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4686-2003 (R) FITTING, ELBOW, 90-? REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4687-1997 FITTING ASSEMBLY, ELBOW, 90 DEGREE, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT
SAE-AS-4688-1994 FITTING, TEE, REDUCER, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4689-2003 (R) FITTING, TEE, REDUCER, BULKHEAD ON RUN, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4690-2003 (R) FITTING, TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS AND SHORT FLARELESS - FSC 4730
SAE-AS-4691-1997 FITTING ASSEMBLY, TEE, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT ON RUN - FSC 4730
SAE-AS-4692-1997 FITTING ASSEMBLY, TEE, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT ON SIDE - FSC 4730
SAE-AS-4693-1992 UNION, TUBE END, EXTERNAL THREAD TO WELD, SHORT FLARELESS - FSC 4730
SAE-AS-4694-1994 FITTING ASSEMBLY, CAP, HOLLOW END, ACORN, SHORT FLARELESS
SAE-AS-4695-1992 SLEEVE, TUBE END, ACORN TO WELD, SHORT FLARELESS - FSC 4730
SAE-AS-4696-1994 FITTING, SLEEVE, FLARELESS, NONREDUCER AND REDUCER, SHORT ACORN TO WELD TUBE END - FSC 4730
SAE-AS-4697-1999 FITTING END, INTEGRAL CENTERED WELD LIP, DESIGN STANDARD - FSC 4730
SAE-AS-4700-1992 SHORT FLARELESS FITTINGS, INSTALLATION PROCEDURES AND TORQUE FOR
SAE-AS-4701-1992 WIRE, RETAINER, TUBE COUPLING NUT, SHORT FLARELESS - FSC 4730
SAE-AS-4702-1994 NUT, RETAINED, SHORT FLARELESS - FSC 4730
SAE-AS-4703-1993 FITTING END, ACORN, SHORT FLARELESS, DESIGN STANDARD - FSC 4730
SAE-AS-4704-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO STRAIGHT
MALE - FSC 4720
SAE-AS-4705-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45 DEGREE
MALE - FSC 4720
SAE-AS-4706-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90 DEGREE
MALE - FSC 4720
SAE-AS-4710-1993 PI-BUS
SAE-AS-4716-2005 (R) GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS
SAE-AS-47-1944 PUMP, FUEL, MOUNTING PAD AND DRIVE
SAE-AS-4726-1995 NUTS, SELF-LOCKING, UNS S66286 CLASSIFICATION: 220 KSI/850 DEGREES F PROCUREMENT SPECIFICATION - SUPERSEDING
AS 1371; FSC 5310
SAE-AS-4734-2004 MALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, BUTT WELDED - FSC 4730
SAE-AS-4735-1999 (R) FEMALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, SWAGED - FSC 4730
SAE-AS-4736-1999 (R) FEMALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, BUTT WELDED - FSC 4730
SAE-AS-4751/1-2005 COUPLING, SHEET METAL, 40 DEGREES V-BAND, WIDE, STANDARD LATCH - FSC 5342
SAE-AS-4751/2-2005 FLANGE, SHEET METAL, WIDE - FSC 5342
SAE-AS-4751/3-2005 FLANGE END, SOLID, WIDE DESIGN STANDARD - FSC 5342
SAE-AS-4751-2005 COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE
SAE-AS-475-1989 GASKET-SPARK IGNITER
SAE-AS-47641-1999 VALIDATION METHODS FOR MIL-STD-1760B AIRCRAFT STATION INTERFACES
SAE-AS-4764-1995 VALIDATION METHODS FOR MIL-STD-1760 AIRCRAFT STATION INTERFACES
SAE-AS-47642-2004 VALIDATION METHODS FOR MIL-STD-1760C AIRCRAFT STATION INTERFACES
SAE-AS-4774-1994 HOSE, AIR DUCT, FLEXIBLE, SILICONE-COATED FABRIC, 1 PSI, EXTERNAL NYLON HELIX, SELF-EXTINGUISHING - FSC 4720
SAE-AS-4775-2004 AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS
SAE-AS-478-2006 IDENTIFICATION MARKING METHODS
SAE-AS-4786-1995 DRIVER DRILLS BATTERY POWERED
SAE-AS-4787-1992 EDDY CURRENT INSPECTION OF CIRCULAR HOLES IN NONFERROUS METALLIC AIRCRAFT ENGINE HARDWARE
SAE-AS-4792-1993 WATER CONDITIONING AGENTS FOR AQUEOUS MAGNETIC PARTICLE INSPECTION
SAE-AS-4793-1995 FITTING, BEAM SEAL, MALE TUBE END, INTERNAL SWAGE, 4000 PSI, HYDRAULIC
SAE-AS-4796-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO
STRAIGHT MALE - FSC 4720
SAE-AS-4797-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45
DEGREE MALE - FSC 4720
SAE-AS-4798-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90
DEGREE MALE - FSC 4720
SAE-AS-4799-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO
STRAIGHT FEMALE - FSC 4720
SAE-AS-4800-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45
DEGREE FEMALE - FSC 4720
SAE-AS-4801-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90
DEGREE FEMALE - FSC 4720
SAE-AS-4802-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45 DEGREE
FEMALE - FSC 4720
SAE-AS-4803-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90 DEGREE
FEMALE - FSC 4720
SAE-AS-4804-1996 HOSE, AIR DUCT, FLEXIBLE, SILICONE-COATED FABRIC, EXTERNAL NYLON HELIX, LOW-NOISE
SAE-AS-4807-1996 FITTING ASSEMBLY, ELBOW, 90 DEGREE, BEAM SEAL, RETAINED NUT
SAE-AS-4808-1996 FITTING ASSEMBLY, ELBOW, 45 DEGREE, BEAM SEAL, RETAINED NUT
SAE-AS-4809-1996 FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON RUN
SAE-AS-4824-1997 GASKET, FITTING END, 37 DEGREE FLARED - FSC 4730
SAE-AS-4825-1995 GASKET, FITTING END, 24 DEGREE CONE
SAE-AS-4828-1996 TECHNICAL MANUAL DEVELOPMENT FOR GROUND SUPPORT EQUIPMENT
SAE-AS-4831-2003 SOFTWARE INTERFACES FOR GROUND-BASED MONITORING SYSTEMS
SAE-AS-483-1998 SKID CONTROL EQUIPMENT
SAE-AS-4832-1994 GLAND DESIGN: NOMINAL 3/8 IN CROSS SECTION FOR CUSTOM COMPRESSION TYPE SEALS
SAE-AS-4833-1995 AIRCRAFT NEW TIRE STANDARD - BIAS AND RADIAL
SAE-AS-4841-1995 FITTINGS, 37 DEGREE FLARED, FLUID CONNECTION
SAE-AS-4842/1-1995 FITTINGS, 37 DEGREES FLARED TO PIPE THREADED, FLUID CONNECTION
SAE-AS-4842/2-1995 FITTINGS, FLARELESS TO PIPE THREADED, FLUID CONNECTION
SAE-AS-4842-1995 FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION
SAE-AS-4843/1-1995 FITTINGS, BEADED TO 37 DEGREES FLARED, FLUID CONNECTION
SAE-AS-4843/2-1995 FITTINGS, BEADED TO PIPE THREADED, FLUID CONNECTION
SAE-AS-4843-1995 FITTINGS, BEADED, FLUID CONNECTION
SAE-AS-4847-1994 SHANK NUTS, CAPTIVE BLIND FASTENER, MATING RETAINING FLANGE, DESIGN STANDARD FOR
SAE-AS-4851-2005 RELATIVE THERMAL LIFE AND TEMPERATURE INDEX FOR INSULATED ELECTRIC WIRE
SAE-AS-4854-2003 (R) FITTING, ELBOW, 90, PIPE, INTERNAL AND EXTERNAL THREAD - FSC 4730
SAE-AS-4855-2003 (R) FITTING, ELBOW, 45, PIPE, INTERNAL AND EXTERNAL THREAD - FSC 4730
SAE-AS-4856-2003 (R) FITTING, ELBOW, 90, PIPE, INTERNAL THREAD - FSC 4730
SAE-AS-4857-2003 (R) FITTING, TEE, PIPE, INTERNAL THREAD - FSC 4730
SAE-AS-4858-2003 (R) FITTING, CROSS, PIPE, INTERNAL THREAD - FSC 4730
SAE-AS-4859-2005 (R) FITTING, COUPLING, PIPE, INTERNAL THREAD - FSC 4730
SAE-AS-4860-2003 (R) FITTING, NIPPLE, PIPE, EXTERNAL THREAD - FSC 4730
SAE-AS-4861-2003 (R) FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD - FSC 4730
SAE-AS-4862-1995 PLUG, PIPE, EXTERNAL THREAD, HEX HEAD
SAE-AS-4863-1995 PLUG, PIPE, EXTERNAL THREAD
SAE-AS-4864-2003 (R) FITTING, PLUG, PIPE, EXTERNAL THREAD, COUNTERSINK HEX HEAD - FSC 4730
SAE-AS-4873-1997 GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL AND FACE 800 PSI MAXIMUM SERVICE
SAE-AS-4875/1-1995 FITTINGS, STRAIGHT THREAD BOSS OR FLANGED TO 37 DEGREE FLARED, FLUID CONNECTION
SAE-AS-4875/2-1995 FITTINGS, FLANGED TO BEADED, FLUID CONNECTION STANDARD
SAE-AS-4875/3-1997 FITTINGS, STRAIGHT THREAD PORT OR FLANGED TO 24 DEGREE CONE FLARELESS, FLUID CONNECTION
SAE-AS-4875-1995 FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION
SAE-AS-4877-2004 BOLTS AND SCREWS, NICKEL ALLOY UNS N07718, CLASSIFICATION: 185 KSI/1200 - PROCUREMENT SPECIFICATION - FSC
5306
SAE-AS-4882-2003 CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIRE - FSC 5340
SAE-AS-4891-1999 STUD, LOCKED IN, KEY LOCKED, UNS S66286, CLASSIFICATION: 140 KSI PROCUREMENT SPECIFICATION FOR - FSC 5307
SAE-AS-4892-1999 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR - FSC
5340
SAE-AS-4893-1996 GENERIC OPEN ARCHITECTURE (GOA) FRAMEWORK
SAE-AS-4897-1994 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT
SPECIFICATION FOR
SAE-AS-49011-1999 ROD END - THREADED, AIRCRAFT - FSC 5340; SHOULD BE USED INSTEAD OF AN490, WHICH WAS CANCELLED ON 30 JUNE
1999
SAE-AS-4914-1999 AIRCRAFT FLUORESCENT LIGHTING BALLAST/FIXTURE SAFETY DESIGN STANDARD
SAE-AS-4941-1998 AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS
SAE-AS-4950-1998 DESIGN AND PERFORMANCE CRITERIA TRANSPORT AIRCRAFT PORTABLE MEGAPHONES
SAE-AS-4958-1997 PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM - UNS G41300 AND
UNS G43400
SAE-AS-4959-1997 BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 140 KSI 1650 DEGREES F SOLUTION HEAT TREATMENT AGED
BEFORE FILLET AND THREAD ROLLING PROCUREMENT SPECIFICATION - FSC 5306
SAE-AS-4970-1999 HUMAN FACTORS CONSIDERATIONS FOR OUTDOOR LASER OPERATIONS IN THE NAVIGABLE AIRSPACE
SAE-AS-4971-1996 FITTING, ELBOW, 90 DEGREE, WELD RING - FSC 4730
SAE-AS-4972-1996 FITTING, TEE, WELD RING - FSC 4730
SAE-AS-4973-2000 (R) RING, WELD - FSC 4730
SAE-AS-4976-1999 INSERT, SCREW THREAD, NON-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR - FSC
5340
SAE-AS-4983-1995 SPRING PINS, TUBULAR, COILED CORROSION RESISTANT NICKEL BASE ALLOY, PROCUREMENT SPECIFICATION FOR - FSC
5315; UNS N07718
SAE-AS-4984-1999 COATING REQUIREMENTS FOR AEROSPACE HAND TOOLS
SAE-AS-5000-2006 FITTING, PLUG-IN UNION, RING LOCKED, 24-?CONE, FLUID CONNECTION, 5080 PSI, SPECIFICATION FOR
SAE-AS-5002-1996 FITTING, ELBOW, 90 DEGREE, BEAM SEAL - FSC 4730
SAE-AS-5003-1996 FITTING, TEE, BEAM SEAL BULKHEAD ON RUN - FSC 4730
SAE-AS-5004-1996 FITTING, TEE, BEAM SEAL BULKHEAD ON SIDE - FSC 4730
SAE-AS-5008-1997 FITTING, UNION, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-5009-1997 FITTING, ELBOW, 90 DEGREE, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-5010-1997 FITTING, TEE, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-5011-1997 FITTING, CROSS, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-5012-1997 FITTING, SLEEVE, STRAIGHT, FLARED, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-5013-1997 FITTING, ADAPTER, STRAIGHT FLARELESS, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-50141-2005 (R) TUBE, PNEUMATIC TIRE, AIRCRAFT
SAE-AS-5014-1997 FITTING, SLEEVE, STRAIGHT, FLARELESS, EXTERNAL SWAGE, HYDRAULIC - FSC 4730
SAE-AS-50151-2004 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR - FSC 5935
SAE-AS-5017-1997 AIR FILLING VALVES
SAE-AS-5018-1995 WASHER, FLAT, BEAM SEAL FITTING - FSC 4730
SAE-AS-5019-1995 NUT, BULKHEAD, BEAM SEAL FITTING - FSC 4730
SAE-AS-5054-2005 AREAS FOR CALCULATING STRESS OR LOAD VALUES FOR EXTERNALLY AND INTERNALLY THREADED FASTENERS
SAE-AS-50571-1999 LIGHTS, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR - FSC 6220; SHOULD BE USED INSTEAD OF MIL-L-
5057F, WHICH WAS CANCELLED ON 7 SEPTEMBER 1999
SAE-AS-506-2004 HIGH TEMPERATURE INSULATED TERMINALS & SPLICES
SAE-AS-5072/1-2002 COUPLING ASSEMBLY, .375 DIAMETER, NON-LOCKING PROBE STYLE, MINIATURE SELF-SEALING-ALIGNING, SELF-SEALING
DISCONNECT FOR ETHYLENE/GLYCOL/ WATER
SAE-AS-5072/2-2002 COUPLING ASSEMBLY, .375 DIAMETER, NON-LOCKING PROBE STYLE, MINIATURE SELF-SEALING-ALIGNING, SELF-SEALING
DISCONNECT FOR ETHYLENE/GLYCOL/WATER
SAE-AS-5072/3-2002 COUPLING ASSEMBLY, .420 DIAMETER, NON-LOCKING PROBE STYLE, MINIATURE SELF-SEALING-ALIGNING, SELF-SEALING
DISCONNECT FOR ETHYLENE/GLYCOL/WATER
SAE-AS-5072-2002 COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, MINIATURE SELF-ALIGNING, SELF-SEALING DISCONNECTS
SAE-AS-50861/1-1998 WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, NYLON JACKET, TIN-COATED COPPER CONDUCTOR, 600-VOLT, 105
DEGREES C - FSC 6145
SAE-AS-50861/2-2001 WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, PVC-GLASS-NYLON, TIN-COATED COPPER CONDUCTOR, 600-VOLT,
105 DEGREES C - FSC 6145
SAE-AS-50861/3-2001 WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, PVC-GLASS-PVC-NYLON, TIN-COATED COPPER CONDUCTOR, 600-
VOLT, 105 DEGREES C - FSC 6145
SAE-AS-50861/4-2001 WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, NYLON JACKET, TIN-COATED COPPER CONDUCTOR, 3000-VOLT, 105
DEGREES C - FSC 6145
SAE-AS-50861/5-2001 WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, POLYVINYLIDENE FLUORIDE JACKET, TIN-COATED COPPER
CONDUCTOR, 600-VOLT, 110 DEGREES C - FSC 6145
SAE-AS-50861/6-2001 WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, POLYVINYLIDENE FLUORIDE JACKET, SILVER-COATED COPPER
ALLOY CONDUCTOR, 600-VOLT, 110 DEGREES C - FSC 6145
SAE-AS-50861/7-1998 WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, NYLON JACKET, TIN-COATED COPPER CONDUCTOR, MEDIUM WEIGHT,
600-VOLT, 105 DEGREES C - FSC 6145
SAE-AS-50861-1998 WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY - FSC 6145; AMENDMENT 1 - DECEMBER
2004
SAE-AS-50881-2003 (R) WIRING AEROSPACE VEHICLE - AMENDMENT 1 - NOVEMBER 2003
SAE-AS-51007-2001 GASKET, RUBBER, SYNTHETIC - FSC 5330
SAE-AS-5103-1996 FITTING ASSEMBLY, PLUG, RING LOCKED PORT CONNECTION, 4000 PSI AND 5000 PSI/8/
SAE-AS-5104-2004 PLUGS, PORT CONNECTION, RING LOCKED, AS1300 PORT, INSTALLATION AND REMOVAL OF
SAE-AS-5116-2003 MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR GROUND ICE DETECTION SYSTEMS
SAE-AS-5117-2000 CLIP, SPRING RETENTION - ELECTRICAL CABLE - FSC 5340
SAE-AS-5127/1-2002 AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS
SAE-AS-5127/2-2000 TEST METHODS FOR AEROSPACE FIREWALL SEALANT FLAME PENETRATION
SAE-AS-5127-2002 METHODS FOR TESTING AEROSPACE SEALANTS
SAE-AS-5131-1997 TUBE END - BEADED, DESIGN STANDARD
SAE-AS-5132-1997 FITTING END - HOSE CONNECTION, DESIGN STANDARD - FSC 4730
SAE-AS-5133-1997 NUT, FLOATING, ATTACHED RETENTION ELEMENT (A.R.E.) - HOLE DIMENSIONS AND INSTALLATION REQUIREMENTS
SAE-AS-5134-2001 AVIATION DISTRESS SIGNAL
SAE-AS-5135-1997 DESICCANT PORT AND DESICCANT HOLDER
SAE-AS-5148-1998 ASSEMBLY, INSTALLATION AND TORQUE FOR FLARELESS AND STRAIGHT THREAD FLUID FITTINGS AND TUBE ASSEMBLIES
SAE-AS-5160-2003 FITTING, BOLT, FLARED
SAE-AS-5161-2003 FITTING, BOLT, FLUID PASSAGE - FSC 4730
SAE-AS-5162-2003 FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90 DEGREE - FSC 4730
SAE-AS-5163-2000 FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 75 DEGREE - FSC 4730
SAE-AS-5164-2003 FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45 DEGREE - FSC 4730
SAE-AS-5165-2003 FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE - FSC 4730
SAE-AS-5166-2003 FITTING, TEE, AIR PRESSURE GAGE - FSC 4730
SAE-AS-5167-2003 FITTING, ADAPTER, FLARED, AIR PRESSURE GAGE - FSC 4730
SAE-AS-5168-2003 FITTING, PLUG, TUBE END, FLARED - FSC 4730; SHOULD BE USED INSTEAD OF THE FOLLOWING TWO FLARED FITTING
STANDARDS, WHICH WERE CANCELLED ON 28 SEPTEMBER 1999: AN806 REV 7 AND MS24404E
SAE-AS-5169-1998 FITTING, PORT PLUG AND BLEEDER - FSC 4730
SAE-AS-5170-2003 FITTING, PLUG, PORT, STRAIGHT THREAD, O-RING SEAL - FSC 4730
SAE-AS-5171-1997 WASHER, FLAT, FITTING, FLARED AND FLARELESS - FSC 4730
SAE-AS-5172-2003 FITTING, ADAPTER, PORT, REDUCER - FSC 4730; SHOULD BE USED INSTEAD OF AN893 AND MS24397, WHICH WAS CANCELLED
ON 26 MAY 2000; SAE 5202, REFERENCE WITHIN SAE AS 5172, HAS NOT BEEN ISSUED; USE MS33649 IN PLACE OF SAE AS 5202 UNTIL SAE AS
520
SAE-AS-5173-2005 FITTING, BUSHING, PORT, REDUCER - FSC 4730
SAE-AS-5174-2005 FITTING, UNION AND REDUCER, FLARED - FSC 4730
SAE-AS-5175-2004 NUT, COUPLING, FLARED - FSC 4730
SAE-AS-5176-2003 FITTING, SLEEVE, FLARED - FSC 4730; SHOULD BE USED INSTEAD OF MS20819G, WHICH WAS CANCELLED ON 28 SEPTEMBER
1999
SAE-AS-5178-2003 NUT, FITTING, BULKHEAD - FSC 4730; SHOULD BE USED INSTEAD OF AN924 REV 11, WHICH WAS CANCELLED ON 16 MARCH
2000
SAE-AS-5179-2003 NUT, FITTING, PORT - FSC 4730; SHOULD BE USED INSTEAD OF AN6289 REV 7, WHICH WAS CANCELLED ON 28 SEPTEMBER
1999
SAE-AS-5180-1998 FITTING, ADAPTER, BULKHEAD, FLARED TO HOSE - FSC 4730; SUPERSEDES AN807
SAE-AS-5181-2000 FITTING, ELBOW, 90 DEGREES, BULKHEAD, FLARED TO HOSE - FSC 4730; SUPERSEDES AN838
SAE-AS-5182-2005 FITTING, ELBOW, 45 DEGREES, BULKHEAD, FLARED TO HOSE - FSC 4730
SAE-AS-5183-1998 FITTING, ADAPTER, HOSE TO STRAIGHT PIPE - FSC 4730; SUPERSEDES AN840
SAE-AS-5184-1998 FITTING, ADAPTER, FLARED TO HOSE - FSC 4730; SUPERSEDES AN841
SAE-AS-5185-2000 FITTING, ELBOW, 90-? PIPE TO HOSE - FSC 4730; SUPERSEDES AN842
SAE-AS-5186-2000 FITTING, ELBOW, 45 DEGREES, PIPE TO HOSE - FSC 4730; SUPERSEDES AN844
SAE-AS-5187-2000 FITTING, ELBOW, 45 DEGREES, BULKHEAD, HOSE - FSC 4730; SUPERSEDES AN846
SAE-AS-5188-2000 FITTING, ELBOW, 90 DEGREES, BULKHEAD, HOSE - FSC 4730; SUPERSEDES AN848
SAE-AS-5189-1998 FITTING, ADAPTER, HOSE - FSC 4730; SUPERSEDES AN849
SAE-AS-5190-2000 FITTING, ELBOW, 90 DEGREE, INTERNAL STRAIGHT THREAD PORT - FSC 4730
SAE-AS-5191-2000 FITTING, ELBOW, 45 DEGREES, INTERNAL STRAIGHT THREAD PORT - FSC 4730
SAE-AS-5192-2005 FITTING, TEE, INTERNAL STRAIGHT THREAD PORT - FSC 4730
SAE-AS-5193-2000 FITTING, CROSS, INTERNAL STRAIGHT THREAD PORT - FSC 4730
SAE-AS-5194-2003 FITTING, ADAPTER, STRAIGHT PIPE TO FLARED - FSC 4730; SHOULD BE USED INSTEAD OF AN816 REV 13, WHICH WAS
CANCELLED ON 19 MAY 2000
SAE-AS-5195-2005 FITTING, ELBOW, 90 DEGREES, FLARED TO PIPE - FSC 4730
SAE-AS-5196-2005 FITTING, ELBOW, 45 DEGREES, FLARED TO PIPE - FSC 4730; SHOULD BE USED INSTEAD OF MS20823, WHICH WAS
CANCELLED 29 SEPT 2000
SAE-AS-5197-2003 FITTING, TEE, FLARED TO PIPE ON SIDE - FSC 4730; SHOULD BE USED INSTEAD OF MS20825D, WHICH WAS CANCELLED ON
29 SEPTEMBER 2000
SAE-AS-5198-2005 FITTING, TEE, FLARED TO PIPE ON RUN - FSC 4730; SHOULD BE USED INSTEAD OF MS20826D, WHICH WAS CANCELLED ON
29 SEPTEMBER 2000
SAE-AS-51989-1999 STUD, LOCKED IN-RING LOCKED, SERRATED - FSC 5307
SAE-AS-51990-2005 RING, LOCK, SERRATED - FSC 5365
SAE-AS-51992-1999 STUD, LOCKED IN-RING, SERRATED, HIGH STRENGTH - FSC 5307
SAE-AS-51997-2005 RING, LOCK, SERRATED-HIGH STRENGTH - FSC 5365; UNS G41300; UNS G41400; UNS G87400; UNS S66286
SAE-AS-5200-2000 PORT OR FITTING END, INTERNAL TAPER PIPE THREAD, DESIGN STANDARD - FSC 4730
SAE-AS-5201-2000 FITTING END, EXTERNAL TAPER PIPE THREAD, DESIGN STANDARD - FSC 4730
SAE-AS-5202-2005 PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD - FSC 4730; SUPERSEDES SAE AS 33649A
SAE-AS-5203-1999 TUBE END, DOUBLE FLARE, DESIGN STANDARD - FSC 4730
SAE-AS-5205-2003 NUT, FITTING, ENGINE, FLARED - FSC 4730
SAE-AS-5206-2003 NUT, FLARED, LONG - FSC 4730
SAE-AS-5227-2001 FLANGE, STRAIGHT THREAD PORT, WELD - FSC 4730
SAE-AS-5229-2003 PORT, INTERNAL STRAIGHT THREAD, AIR CONNECTION, DESIGN STANDARD
SAE-AS-5230-1998 FITTING, UNION AND REDUCER, FLARELESS - FSC 4730
SAE-AS-5231-1998 FITTING, PLUG, TUBE END, FLARELESS - FSC 4730
SAE-AS-5232-1998 FITTING, ADAPTER, REDUCER, PORT TO FLARELESS - FSC 4730
SAE-AS-5233-2000 FITTING ASSEMBLY, CAP, FLARELESS - FSC 4730
SAE-AS-5235-2006 FITTING, SLEEVE, COUPLING, FLARELESS - FSC 4730
SAE-AS-5238-1998 FITTING, ADAPTER, FLARELESS TO FLARED - FSC 4730
SAE-AS-5239-1998 FITTING, ADAPTER, BULKHEAD, FLARELESS TO FLARED - FSC 4730
SAE-AS-5240-1997 FITTING, ELBOW, 90 DEGREE, BULKHEAD, FLARELESS TO FLARED - FSC 4730
SAE-AS-5241-1997 FITTING, ELBOW, 90 DEGREE, BULKHEAD, FLARED TO FLARELESS - FSC 4730
SAE-AS-5242-1997 FITTING, ELBOW, 45 DEGREE, BULKHEAD, FLARELESS TO FLARED - FSC 4730
SAE-AS-5255-1997 EXFOLIATION TESTING OF ALUMINUM
SAE-AS-5258/10-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, TRANSITION, STRAIN RELIEF AND SEALING, T
SAE-AS-5258/1-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, BOOT, STRAIN RELIEF AND SEALING, STRAIGHT
SAE-AS-5258/2-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, BOOT, STRAIN RELIEF AND SEALING, RIGHT ANGLE
SAE-AS-5258/3-1998 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, BOOT, STRAIN RELIEF AND SEALING, STRAIGHT, LOW
PROFILE |
