SAE-AS-39029/57-2000 CONTACTS, ELECTRICAL CONNECTORS, SOCKET, CRIMP REMOVABLE (FOR MIL-C-24308, MIL-C-38999 SERIES II, MIL-C
-55302/68, /71, /72, /75 AND MIL-C-83733 CONNECTORS) - FSC 5935
SAE-AS-39029/58-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-24308, MIL-C-38999 SERIES I, II, III,
AND IV, AND MIL-C-55302/69 AND MIL-C-83733 CONNECTORS) - FSC 5935
SAE-AS-39029/59-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-C-38999 SERIES I,
III, AND IV CONNECTORS) - FSC 5935
SAE-AS-39029/60-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-C-38999 SERIES I, III,
AND IV CONNECTORS) - FSC 5935
SAE-AS-39029/6-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-81511 SERIES 1 AND 2
CONNECTORS) - FSC 5935
SAE-AS-39029/63-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-24308 CONNECTORS) - FSC 5935
SAE-AS-39029/64-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-24308 CONNECTORS) - FSC 5935
SAE-AS-39029/69-2001 CONNECTOR CONTACTS, ELECTRICAL SOCKET, CRIMP REMOVABLE, FOR MIL-C-85028 (AS) CONNECTORS - FSC 5935;
AMENDMENT 1 - DECEMBER 2004
SAE-AS-39029/70-2001 CONNECTOR CONTACT, ELECTRICAL PIN, CRIMP REMOVABLE, FOR MIL-C-85028 (AS) CONNECTORS - FSC 5935;
AMENDMENT 1 - DECEMBER 2004
SAE-AS-39029/71-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-C-38999 SERIES
I, II, III AND IV, MIL-C-24308, MIL-C-83733, AND MIL-C-55302/69 CONNECTORS) - FSC 5935
SAE-AS-39029/7-2001 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703
SERIES 3 CONNECTORS) - FSC 5935
SAE-AS-39029/72-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-C-38999
SERIES I, II, III, AND IV, MIL-C-24308, AND MIL-C-55302/68, /71, AND /75 CONNECTORS) - FSC 5935
SAE-AS-39029/73-2000 CONTACTS, ELECTRICAL CONNECTORS, SOCKET, SOLDER, REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-C-83723 SERIES
III, MIL-C-26482 SERIES 2, MIL-C-83733, AND DOD-C-83527 CONNECTORS) - FSC 5935
SAE-AS-39029/74-2000 CONTACTS, ELECTRICAL CONNECTORS, PIN, SOLDER, REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-C-83723 SERIES III,
MIL-C-26482 SERIES 2, MIL-C-83733 AND DOD-C-83527 CONNECTORS) - FSC 5935
SAE-AS-39029/75-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-C-38999 SERIES I,
III, AND IV CONNECTORS) - FSC 5935
SAE-AS-39029/76-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-C-38999 SERIES I, II,
III, IV AND MIL-C-24308 CONNECTORS) - FSC 5935
SAE-AS-39029/77-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-C-38999 SERIES I,
III, AND IV CONNECTORS) - FSC 5935
SAE-AS-39029/78-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-C-38999 SERIES II
AND MIL-C24308 CONNECTORS) - FSC 5935
SAE-AS-39029/79-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-28748/9 CONNECTORS) - FSC 5935
SAE-AS-39029/80-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-28748/10 CONNECTORS) - FSC
5935
SAE-AS-39029/8-2001 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 2 AND MIL-C-
81703 SERIES 3 CONNECTORS - FSC 5935
SAE-AS-39029/83-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-28840 CONNECTORS) - FSC 5935
SAE-AS-39029/84-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-28840 CONNECTORS) - FSC 5935
SAE-AS-39029/85-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-C-5015 MS3450 SERIES AND
MIL-C-83723 SERIES II CONNECTORS) - FSC 5935
SAE-AS-39029/86-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-C-5015 MS3450 SERIES AND
MIL-C-83723 SERIES II CONNECTORS) - FSC 5935
SAE-AS-39029/87-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-C-38999 SERIES I, II, III,
AND IV, AND MIL-C-24308, AND MIL-C-83733) - FSC 5935
SAE-AS-39029/88-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-C-38999 SERIES I, II,
III, IV CONNECTORS) - FSC 5935
SAE-AS-39029/89-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (THERMOCOUPLE FOR MIL-C-38999 SERIES II, MIL-C-
83733, AND MIL-C-24308 CONNECTORS) - FSC 5935
SAE-AS-39029/90-2001 CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8 - FSC 5935
SAE-AS-39029/91-2001 CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SHIELDED, SIZE 8 - FSC 5935
SAE-AS-39029/9-2001 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE, (FOR MIL-C-26482 SERIES 2 AND MIL-C-
81703 SERIES 3, MIL-C-83723 SERIES 3, AND MIL-C-83733 CONNECTORS) - FSC 5935
SAE-AS-39029/92-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-R-6106 AND MIL-S-12883/40 AND /41 RELAY
SOCKETS) - FSC 5935; AMENDMENT 1: 12/2005
SAE-AS-39029/93-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR DOD-C-83527, CONNECTOR) - FSC 5935
SAE-AS-39029/94-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR DOD-C-83527, CONNECTOR) - FSC 5935
SAE-AS-39029/97-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 1 (FOR DOD-C-83527 CONNECTORS) - FSC
5935
SAE-AS-39029/98-2000 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 1 (FOR DOD-C-83527 CONNECTORS) -
FSC 5935
SAE-AS-39029/99-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 5 (FOR DOD-C-83527 CONNECTORS) - FSC
5935
SAE-AS-39029-2001 CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR - AMENDMENT 1 - FEBRUARY 2005
SAE-AS-398-2001 DIRECTION INSTRUMENT, MAGNETIC, NON-STABILIZED TYPE (MAGNETIC COMPASS)
SAE-AS-39901-2002 (R) BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH - FSC 3110; SHOULD BE USED INSTEAD OF MIL-B-
3990D(3), WHICH WAS CANCELLED ON 05 APRIL 1999
SAE-AS-400-2001 CARGO COMPARTMENT FIRE DETECTION INSTRUMENTS (RECIPROCATING ENGINE POWERED AIRCRAFT)
SAE-AS-4006-1993 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, STRAIGHT TO STRAIGHT
- FSC 4720
SAE-AS-4007-1993 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, STRAIGHT TO 45
DEGREES - FSC 4720
SAE-AS-4008-1993 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, STRAIGHT TO 90
DEGREES - FSC 4720
SAE-AS-4009-1993 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, 45 DEGREES TO 45
DEGREES - FSC 4720
SAE-AS-4010-1993 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, 45 DEGREES TO 90
DEGREES - FSC 4720
SAE-AS-4011-1993 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, 90 DEGREES TO 90
DEGREES
SAE-AS-402-2001 AUTOMATIC PILOTS
SAE-AS-40401-2000 SOLENOID, ELECTRICAL, GENERAL SPECIFICATION FOR
SAE-AS-4041-1995 AIR MODE GENERAL PURPOSE CONTAINERS
SAE-AS-404-2001 ELECTRIC TACHOMETER: MAGNETIC DRAG (INDICATOR & GENERATOR)
SAE-AS-405-2001 FUEL AND OIL QUANTITY INSTRUMENTS
SAE-AS-4052-2001 GLAND DESIGN: SCRAPER, LANDING GEAR, INSTALLATION
SAE-AS-4059-2005 (R) AEROSPACE FLUID POWER - CLEANLINESS CLASSIFICATION FOR HYDRAULIC FLUIDS
SAE-AS-4060-1995 TUBE FITTING SWAGED JOINT, ROLLER EXPANDER MANUAL PROCESS, REQUIREMENTS FOR
SAE-AS-407-2001 FUEL FLOWMETERS
SAE-AS-4073-1993 AIR CYCLE AIR CONDITIONING SYSTEMS FOR MILITARY AIR VEHICLES
SAE-AS-4074.1-1988 LINEAR TOKEN PASSING MULTIPLEX DATA BUS
SAE-AS-4075/1-1995 OPTICAL IMPLEMENTATION RELATING TO THE HIGH SPEED RING BUS (HSRB)
SAE-AS-4075-1992 HIGH SPEED RING BUS (HSRB) STANDARD - SUPERSEDING AS 4074.2
SAE-AS-4076-1987 CONTRACTILE STRAIN RATIO TESTING OF TITANIUM HYDRAULIC TUBING
SAE-AS-408-2001 PRESSURE INSTRUMENTS - FUEL, OIL AND HYDRAULIC (RECIPROCATING ENGINE POWERED AIRCRAFT)
SAE-AS-4088-2006 AEROSPACE ROD SCRAPER GLAND DESIGN STANDARD
SAE-AS-4098-1995 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 400 DEGREES F, 5000 PSI HYDRAULIC
AND PNEUMATIC
SAE-AS-4099-2005 (R) ADAPTER, ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARELESS TUBE END - FSC 4730
SAE-AS-4108/1-1991 T-BOLT, A-286, 1000 DEGREES F - FSC 5306
SAE-AS-4108/2-1991 T-BOLT, A-286, 1000 DEGREES F BUSHING HEAD - FSC 5306
SAE-AS-4108/3-1991 EYE BOLT, A-286, 1000 DEGREES F - FSC 5306
SAE-AS-4108-1991 T-BOLT AND EYE BOLT, A-286 CRES, 1000 DEGREES F FATIGUE RATED
SAE-AS-4111-1998 VALIDATION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS REMOTE TERMINALS
SAE-AS-4112-1989 PRODUCTION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS REMOTE TERMINALS
SAE-AS-4113-1989 VALIDATION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS BUS CONTROLLERS
SAE-AS-4114-1989 PRODUCTION TEST PLAN FOR THE TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS BUS CONTROLLERS
SAE-AS-4115-1989 TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS SYSTEM
SAE-AS-4116-1990 TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS MONITORS
SAE-AS-4117-1991 TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/ RESPONSE MULTIPLEX DATA BUS COUPLERS, TERMINATORS, AND DATA
BUS CABLES
SAE-AS-412-2001 CARBON MONOXIDE DETECTOR INSTRUMENTS
SAE-AS-4130-2004 ELBOW, 45 DEGREE, BULKHEAD, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4131-2004 ELBOW, 90-? REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4132-2004 ELBOW, 90-? BULKHEAD, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4133-2004 TEE, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4134-2004 TEE, BULKHEAD ON RUN, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4135-2004 TEE, BULKHEAD ON SIDE, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4136-2004 CROSS, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4137-2004 ELBOW, 45-? SWIVEL, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4138-2004 ELBOW, 90-? SWIVEL, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4139-2004 TEE, SWIVEL ON RUN, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4140-2004 TEE, SWIVEL ON SIDE, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4141-2004 CROSS, SWIVEL ON SIDE, REDUCED BODY, FLARELESS - FSC 4730
SAE-AS-4156-1998 COLOR-CODED INCANDESCENT FLANGE BASE T-1 AND T-1 3/4 LAMPS FOR VOLTAGE IDENTIFICATION
SAE-AS-4157-1995 COUPLING ASSEMBLIES, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT 5000 AND 8000 POUNDS PER SQUARE INCH, GAGE
SAE-AS-4159-1988 SPECIFICATION FOR AN AUTOMATED INTERCHANGE OF STANDARDS DATA
SAE-AS-4167-1993 WRENCHES; FLARE NUT, CROWFOOT, 12-POINT NONDISTORTING
SAE-AS-4194-1991 SHEET AND STRIP SURFACE FINISH NOMENCLATURE
SAE-AS-4200-1994 FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 8000 PSI - FSC 4730
SAE-AS-4201-1998 PORT - RING LOCKED FLUID CONNECTION TYPE, 8000 PSI DESIGN STANDARD - FSC 4730
SAE-AS-4202-1998 ADAPTER - PORT CONNECTION, RING LOCKED DESIGN, INSTALLATION AND REMOVAL OF 8000 PSI SYSTEMS
SAE-AS-4203-1996 FITTING, BEAM SEAL, FEMALE TUBE END, INTERNAL SWAGE, 4000 PSI, HYDRAULIC - FSC 4730
SAE-AS-4207-1996 FITTING END, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD - FSC 4730
SAE-AS-4208-1996 FITTING END, BULKHEAD, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD - FSC 4730
SAE-AS-4209-1997 FITTING END ASSEMBLY, INTERNAL THREAD, RETAINED NUT, BEAM SEAL, DESIGN STANDARD - FSC 4730
SAE-AS-4210-1996 (R) FITTING, TEE, BEAM SEAL - FSC 4730
SAE-AS-4211-1996 (R) FITTING, CROSS, BEAM SEAL - FSC 4730
SAE-AS-4212-1996 FITTING, UNION, REDUCER, BEAM SEAL - FSC 4730
SAE-AS-4213-1996 FITTING, PLUG, BEAM SEAL, HYDRAULIC - FSC 4730
SAE-AS-4214-1997 (R) FITTING, CAP ASSEMBLY, BEAM SEAL, HYDRAULIC - FSC 4730
SAE-AS-4215-1997 FITTING, ADAPTER, BEAM SEAL, EXTERNAL THREAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC 4730
SAE-AS-4216-1995 FITTING, BEAM SEAL, MALE BULKHEAD TUBE END, INTERNAL SWAGE, 4000 PSI, HYDRAULIC - FSC 4730
SAE-AS-4217-1997 FITTING, ADAPTER, BEAM SEAL, BULKHEAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC 4730
SAE-AS-4218-1997 FITTING, ELBOW, 45 DEGREE, BEAM SEAL, EXTERNAL THREAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC
4730
SAE-AS-4219-1997 FITTING, ELBOW, 45 DEGREE, BEAM SEAL, BULKHEAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC 4730
SAE-AS-4220-1996 FITTING, ELBOW, 45 DEGREE, BEAM SEAL BULKHEAD - FSC 4730
SAE-AS-4221-1996 FITTING, ELBOW, 90 DEGREE, BEAM SEAL BULKHEAD - FSC 4730
SAE-AS-422-1989 SPARK IGNITER OUTLINE RIGHT ANGLE FLANGE MOUNTING
SAE-AS-4222-2003 FITTING, UNION, BEAM SEAL - FSC 4730
SAE-AS-4223-1996 FITTING, UNION, BULKHEAD, BEAM SEAL - FSC 4730
SAE-AS-4224-1996 FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON SIDE - FSC 4730
SAE-AS-4224-1996 FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON SIDE - FSC 4730
SAE-AS-4225-1997 FITTING, ELBOW, 90 DEGREE, BEAM SEAL, EXTERNAL THREAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC
4730
SAE-AS-4225-1997 FITTING, ELBOW, 90 DEGREE, BEAM SEAL, EXTERNAL THREAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC
4730
SAE-AS-4226-1997 FITTING, ELBOW, 90 DEGREE, BEAM SEAL, BULKHEAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC 4730
SAE-AS-4226-1997 FITTING, ELBOW, 90 DEGREE, BEAM SEAL, BULKHEAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC 4730
SAE-AS-4227-2005 (R) FITTING ASSEMBLY, ADAPTER, INTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4030
SAE-AS-4227-2005 (R) FITTING ASSEMBLY, ADAPTER, INTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4030
SAE-AS-4228-2005 (R) FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4030
SAE-AS-4228-2005 (R) FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4030
SAE-AS-4229-1996 FITTING, ADAPTER, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4229-1996 FITTING, ADAPTER, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4230-1996 FITTING, ELBOW, 45 DEGREE, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4230-1996 FITTING, ELBOW, 45 DEGREE, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4231-1996 FITTING, ELBOW, 45 DEGREE, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4231-1996 FITTING, ELBOW, 45 DEGREE, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-423-1989 SPARK IGNITER OUTLINE FLANGE MOUNTING
SAE-AS-4232-1996 FITTING, ELBOW, 90 DEGREE, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4232-1996 FITTING, ELBOW, 90 DEGREE, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4233-1996 FITTING, ELBOW, 90 DEGREE, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4233-1996 FITTING, ELBOW, 90 DEGREE, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING - FSC 4730
SAE-AS-4234-1997 FITTING, ADAPTER, BEAM SEAL, SWIVEL NUT, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI - FSC 4730
SAE-AS-424-1989 SPARK IGNITER OUTLINE THREADED MOUNTING
SAE-AS-4251-1988 COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, SELF-ALIGNING, SELF-SEALING DISCONNECTS
SAE-AS-4262-1997 AIRCRAFT GROUND AIR CONDITIONING SERVICE CONNECTION
SAE-AS-4265-1992 IMPULSE TESTING OF HYDRAULIC TUBING AND FITTINGS, S-N CURVE
SAE-AS-4270-1995 VALIDATION METHODS FOR MIL-STD-1760 MISSION STORES
SAE-AS-4273-1996 FIRE TESTING OF FLUID HANDLING COMPONENTS FOR AIRCRAFT ENGINES AND AIRCRAFT ENGINE INSTALLATIONS
SAE-AS-4282-1990 CAP ASSEMBLY, PROTECTIVE CLOSURE, BEAM SEAL FITTING, LOW PRESSURE - FSC 4730
SAE-AS-4283-1994 HANDLES AND ATTACHMENTS FOR HAND SOCKET WRENCHES
SAE-AS-4290-1996 VALIDATION TEST PLAN FOR AS4074 LINEAR TOKEN PASSING MULTIPLEX DATA BUS
SAE-AS-4299-1996 RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION AND HEAT RESISTANT, UNS S66286 - FSC 5365
SAE-AS-4300-2002 (R) FITTING ASSEMBLY, CAP, FLARELESS, PROTECTIVE CLOSURE, LOW PRESSURE - FSC 4730
SAE-AS-4301-2006 (R) FITTING, ADAPTER, CONICAL END TO FLARED TUBE REDUCER FOR SEAL RING - FSC 4730
SAE-AS-4302-1993 TEE ASSEMBLY, FLARED TUBE, RETAINED NUT ON RUN, FOR SEAL RING - FSC 4730
SAE-AS-4303-1993 ELBOW ASSEMBLY 90 DEGREE, FLARED TUBE TO ADJUSTABLE END, FOR SEAL RING - FSC 4730
SAE-AS-4304-1993 TEE ASSEMBLY, FLARED TUBE, RETAINED NUT ON SIDE, FOR SEAL RING - FSC 4730
SAE-AS-4305-1993 TEE ASSEMBLY, FLARED TUBE, ADJUSTABLE END ON RUN, FOR SEAL RING - FSC 4730
SAE-AS-4306-1993 TEE ASSEMBLY, FLARED TUBE, ADJUSTABLE END ON SIDE, FOR SEAL RING - FSC 4730
SAE-AS-4307-2006 (R) FITTING, FLARED TUBE, EXTERNAL STRAIGHT THREAD FOR SEAL RING - FSC 4730
SAE-AS-4308-2006 (R) FITTING, BUSHING-SCREW THREAD EXPANDER FOR SEAL RING - FSC 4730
SAE-AS-4309-1993 NIPPLE - FLARED TUBE TO PIPE THREAD, FOR SEAL RING - FSC 4730
SAE-AS-4310-1993 TEE, FLARED TUBE, INTERNAL THREAD ON RUN, FOR SEAL RING - FSC 4730
SAE-AS-4311-1993 TEE, FLARED TUBE, INTERNAL THREAD ON SIDE, FOR SEAL RING - FSC 4730
SAE-AS-431-1996 TRUE MASS FUEL FLOW INSTRUMENTS
SAE-AS-4312-1993 TEE, FLARED TUBE WITH PIPE THREAD ON RUN, FOR SEAL RING - FSC 4730
SAE-AS-4313-1993 TEE, FLARED TUBE WITH PIPE THREAD ON SIDE, FOR SEAL RING - FSC 4730
SAE-AS-4314-1993 ELBOW ASSEMBLY 45 DEGREE, FLARED TUBE TO ADJUSTABLE END, FOR SEAL RING - FSC 4730
SAE-AS-4315-1993 ELBOW ASSEMBLY 90 DEGREE, FLARED TUBE TO RETAINED NUT, FOR SEAL RING - FSC 4730
SAE-AS-4316-1993 ELBOW ASSEMBLY 45 DEGREE, FLARED TUBE TO RETAINED NUT, FOR SEAL RING - FSC 4730
SAE-AS-4317-2006 (R) FITTING, REDUCER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING - FSC 4730
SAE-AS-4318-1993 ADAPTER, FLARED TUBE .375 BULKHEAD TO BOSS, FOR SEAL RING - FSC 4730
SAE-AS-4319-2006 (R) FITTING, EXPANDER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING - FSC 4730
SAE-AS-4320-1993 FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD - FSC 4730
SAE-AS-4321-1993 FITTING END, INTERNAL FLARE, SINGLE ANGLE, STANDARD DIMENSIONS FOR, DESIGN STANDARD - FSC 4730
SAE-AS-432-1996 TACHOMETER INSTRUMENTS (INDICATOR AND GENERATOR)
SAE-AS-4322-1993 FITTING END, ADJUSTABLE, STANDARD DIMENSIONS FOR, DESIGN STANDARD - FSC 4730
SAE-AS-4323-1993 NUT, RETAINED, FOR FLARED TUBE FITTINGS - FSC 4730
SAE-AS-4324-1993 WASHER, FLARED TUBE FITTING ADJUTABLE END, DESIGN STANDARD - FSC 4730
SAE-AS-4325-1993 FITTING END, CONICAL, STANDARD DIMENSIONS FOR, DESIGN STANDARD - FSC 4730
SAE-AS-4326-1993 NUT, COUPLING - FSC 4730
SAE-AS-4327-1993 SLEEVE, FLARED TUBE FITTING - FSC 4730
SAE-AS-4328-2006 (R) FITTING, UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING - FSC 4730
SAE-AS-4329-1993 CAP ASSEMBLY, PRESSURE SEAL FLARED TUBE FITTING - FSC 4730
SAE-AS-4330-1993 TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD - FSC 4730
SAE-AS-4340-2006 (R) FITTING, BUSHING, SCREW THREAD REDUCER, FOR SEAL RING - FSC 4730
SAE-AS-4341-1993 WIRE, RETAINING FOR RETAINED NUT - FSC 4730
SAE-AS-4346-1993 UNION ASSEMBLY, ADJUSTABLE END - FSC 4730
SAE-AS-4347-1993 UNION ASSEMBLY, DOUBLE RETAINED NUT - FSC 4730
SAE-AS-4348-1993 ADAPTER ASSEMBLY, RETAINED NUT TO BOSS - FSC 4730
SAE-AS-4349-1993 COUPLING, TUBE - FSC 4730
SAE-AS-4350-1993 PLUG, HEX HEAD - FSC 4730
SAE-AS-4352-1996 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL,
STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-4353-1996 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL,
STRAIGHT TO 45 DEGREE - FSC 4720
SAE-AS-4354-1996 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL,
STRAIGHT TO 90 DEGREE - FSC 4720
SAE-AS-4355-1996 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 45
DEGREE TO 45 DEGREE - FSC 4720
SAE-AS-4356-1996 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 45
DEGREE TO 90 DEGREE - FSC 4720
SAE-AS-4357-1996 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 90
DEGREE TO 90 DEGREE - FSC 4720
SAE-AS-4361-2003 MINIMUM PERFORMANCE STANDARDS FOR AEROSPACE ELECTRIC POWER CONVERTERS
SAE-AS-4370-1999 NUT, FITTING, RETAINED
SAE-AS-437-1996 MAXIMUM-ALLOWABLE- AIRSPEED INSTRUMENTS (TURBINE POWERED SUBSONIC AIRCRAFT)
SAE-AS-4372-2002 PERFORMANCE REQUIREMENTS FOR WIRE, ELECTRIC, INSULATED COPPER OR COPPER ALLOY
SAE-AS-4373-2001 TEST METHODS FOR INSULATED ELECTRIC WIRE
SAE-AS-4375-2003 FITTING END, FLARELESS, DESIGN STANDARD - FSC 4730
SAE-AS-4377-2003 FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD - FSC 4730
SAE-AS-4383-1994 FITTING ASSEMBLY, REDUCER RING LOCKED PORT CONNECTION TO BEAM SEAL 5000 PSI /8/ - FSC 4730
SAE-AS-4388-1991 HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56 000 KPA) HYDRAULIC
AND PNEUMATIC
SAE-AS-4389-1992 NUT - SELF-LOCKING CLINCH, SERRATED SHANK, HOLE PREPARATION, INSTALLATION AND REMOVAL PROCEDURES - FSC 5310
SAE-AS-439-2001 STALL WARNING INSTRUMENT (TURBINE POWERED SUBSONIC AIRCRAFT)
SAE-AS-4393-2001 NUT, SELF-LOCKING, UNS S66286, 1200 DEGREES F, 160 000 PSI, UNJ THREAD - FSC 5310
SAE-AS-4395-2003 (R) FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE-AS-4396-2003 (R) FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD
SAE-AS-4401-1996 SEPARABLE FITTINGS, PERMANENT FITTINGS, TUBING, FLUID SYSTEMS 8000 PSI QUALIFICATION TEST STANDARD FOR
SAE-AS-440-1996 AUTOMATIC PILOTS (TURBINE POWERED SUBSONIC AIRCRAFT)
SAE-AS-4405-1995 FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE - FSC 4730
SAE-AS-4406-1995 FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE - FSC 4730
SAE-AS-4407-1995 FITTING ASSEMBLY, ELBOW 90 DEGREES, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE - FSC 4730
SAE-AS-4408-1995 FITTING ASSEMBLY, ELBOW 90 DEGREES, REDUCER AND NONREDUCER, INTERNAL FLARE
SAE-AS-4409-1995 FITTING ASSEMBLY, ELBOW 45 DEGREES, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
SAE-AS-4410-1995 FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN, TO FLARED TUBE
SAE-AS-4411-1995 FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON SIDE TO FLARED TUBE
SAE-AS-4417-1992 NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL, DRY FILM LUBRICATED, 1400
DEGREES F (760 DEGREES C), PROCUREMENT SPECIFICATION
SAE-AS-443-1996 COMPASS, MAGNETIC, NON-STABILIZED TYPE (FOR TURBINE-POWERED, SUBSONIC AIRCRAFT)
SAE-AS-4444/1-1996 SLEEVE, BITE TYPE, 24 DEGREE CONE FLARELESS FITTING
SAE-AS-4444/2-1997 FITTING, 24 DEGREE CONE FLARELESS TO 37 DEGREE FLARED, FLUID CONNECTION SAE-AS-4444-1996 FITTINGS, 24
DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI
SAE-AS-4458-1996 FITTING END, FLARELESS, BLUNT NOSE, DESIGN STANDARD
SAE-AS-4459-2000 (R) FITTINGS, TUBE, FLUID SYSTEM (3000/4000 PSIG RATED PRESSURE), EXTERNALLY SWAGED, SPECIFICATION FOR
SAE-AS-4461-1992 ASSEMBLY AND SOLDERING CRITERIA FOR HIGH QUALITY/HIGH RELIABILITY SOLDERED WIRE AND CABLE TERMINATION IN
AEROSPACE VEHICLES
SAE-AS-4467-1997 STANDARDIZATION, HYDRAULIC TUBE WALLS
SAE-AS-4468-2003 (R) HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
SAE-AS-4468-SUP-1-1999 HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION (SUPPLEMENT 1)
SAE-AS-4469-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-4470-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 45 DEGREE - FSC 4720
SAE-AS-4471-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 90 DEGREE - FSC 4720
SAE-AS-4472-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45 DEGREE TO 45 DEGREE - FSC 4720
SAE-AS-4473-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45 DEGREE TO 90 DEGREE - FSC 4720
SAE-AS-4474-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 90 DEGREE TO 90 DEGREE - FSC 4720
SAE-AS-4475-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT FEMALE - FSC
4720
SAE-AS-4476-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 45 DEGREE FEMALE -
FSC 4720
SAE-AS-4477-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 90 DEGREE FEMALE -
FSC 4720
SAE-AS-4478-2001 (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE - FSC
4720
SAE-AS-4488-1991 TUBULAR ASSEMBLIES, FUSION WELDED, INSPECTION PROCESSES AND ACCEPTANCE STANDARDS FOR
SAE-AS-4491-1991 PLASTIC DISPOSABLE CARTRIDGE, PLUNGER, NOZZLES AND CARTRIDGE ASSEMBLY
SAE-AS-4492-1995 SURVIVOR LOCATOR LIGHTS
SAE-AS-4499-2000 (R) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO
STRAIGHT
SAE-AS-4500-2000 (R) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO
45 DEGREE
SAE-AS-4501-2000 (R) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO
90 DEGREE
SAE-AS-4502-2000 (R) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 45 DEGREES
TO 45 DEGREES
SAE-AS-4503-2000 (R) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 45 DEGREES
TO 90 DEGREES
SAE-AS-4504-2000 (R) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 90 DEGREES
TO 90 DEGREES
SAE-AS-4506-2000 BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 160 KSI, PROCUREMENT SPECIFICATION - FSC 5306
SAE-AS-4510/1-1996 FITTINGS, WELD TO 24 DEGREE CONE FLARELESS, FLUID CONNECTION
SAE-AS-4510/2-1996 FITTINGS, WELD TO BEAM SEAL, FLUID CONNECTION
SAE-AS-4510-1996 FITTINGS, WELD, FLUID CONNECTION, 5000 PSI
SAE-AS-453-1989 SPARK IGNITER GASKET-FLANGE
SAE-AS-4536-1995 SAFETY CABLE KIT PROCUREMENT SPECIFICATION AND REQUIREMENTS FOR USE
SAE-AS-4541-1992 ELBOW, 45 DEGREES, BEAM SEAL, MALE 4000 PSI, HYDRAULIC - FSC 4730
SAE-AS-4542-1992 ELBOW, 90 DEGREES, BEAM SEAL, MALE 4000 PSI, HYDRAULIC - FSC 4730
SAE-AS-4546-1992 HOSE, AIR DUCT, FLEXIBLE, SILICONE-COATED FABRIC, 1 TO -.5 PSI, EXTERNAL NYLON HELIX, SELF- EXTINGUISHING
SAE-AS-4568-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
FLARELESS, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-4569-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
FLARELESS, STRAIGHT TO 45 DEGREES - FSC 4720
SAE-AS-4570-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
FLARELESS, STRAIGHT TO 90 DEGREES - FSC 4720
SAE-AS-4571-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
FLARELESS, 45 DEGREES TO 90 DEGREES - FSC 4720
SAE-AS-4572-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
FLARELESS, 45 DEGREES TO 45 DEGREES - FSC 4720
SAE-AS-4573-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
FLARELESS, 90 DEGREES TO 90 DEGREES - FSC 4720
SAE-AS-4574-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
BEAM SEAL, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-4575-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
BEAM SEAL, STRAIGHT TO 45 DEGREES - FSC 4720
SAE-AS-4576-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
BEAM SEAL, STRAIGHT TO 90 DEGREES - FSC 4720
SAE-AS-4577-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
BEAM SEAL, 45 DEGREES TO 45 DEGREES - FSC 4720
SAE-AS-4578-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
BEAM SEAL, 45 DEGREES TO 90 DEGREES - FSC 4720
SAE-AS-4579-2001 (R) HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI,275 DEGREES F, TITANIUM FITTINGS,
BEAM SEAL, 90 DEGREES TO 90 DEGREES - FSC 4720
SAE-AS-4580-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS,
FLARELESS, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-4581-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS,
FLARELESS, STRAIGHT TO 45 DEGREE - FSC 4720
SAE-AS-4582-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS,
FLARELESS, STRAIGHT TO 90 DEGREE - FSC 4720
SAE-AS-4583-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS,
FLARELESS, 45 DEGREE TO 90 DEGREE - FSC 4720
SAE-AS-4584-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREES F, TITANIUM FITTINGS,
FLARELESS, 45 DEGREE TO 45 DEGREEE - FSC 4720
SAE-AS-4585-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS,
FLARELESS, 90 DEGREE TO 90 DEGREEE - FSC 4720
SAE-AS-4586-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREES F, TITANIUM FITTINGS, BEAM
SEAL, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-4587-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS, BEAM
SEAL, STRAIGHT TO 45 DEGREE - FSC 4720
SAE-AS-4588-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREES F, TITANIUM FITTINGS, BEAM
SEAL, STRAIGHT TO 90 DEGREE - FSC 4720
SAE-AS-4589-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS, BEAM
SEAL, 45 DEGREE 45 DEGREE - FSC 4720
SAE-AS-4590-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS, BEAM
SEAL, 45 DEGREE 90 DEGREE - FSC 4720
SAE-AS-4591-2001 HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 DEGREE F, TITANIUM FITTINGS, BEAM
SEAL, 90 DEGREE 90 DEGREE - FSC 4720
SAE-AS-4604-2003 HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 -, HEAVY DUTY, AIRCRAFT
HYDRAULIC SYSTEMS
SAE-AS-462-1962 SHAFTS FOR BALL BEARING RETAINING SPANNER NUTS AND KEY WASHERS
SAE-AS-4623-2000 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3000 PSI, 275 DEGREES F, HEAVY DUTY,
AIRCRAFT HYDRAULIC SYSTEMS
SAE-AS-4624-2001 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 DEGREES F, 3000 PSI
FLARELESS, TITANIUM FITTINGS, INCLUDING JUMP SIZE, STRAIGHT TO STRAIGHT - FSC 4720
SAE-AS-4625-2001 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 DEGREES F, 3000 PSI
FLARELESS, TITANIUM FITTINGS, INCLUDING JUMP SIZE, STRAIGHT TO 45 DEGREES - FSC 4720
SAE-AS-4626-2001 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 DEGREES F, 3000 PSI
FLARELESS, TITANIUM FITTINGS, INCLUDING JUMP SIZE, STRAIGHT TO 90 DEGREES - FSC 4720
SAE-AS-4627-2000 R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 DEGREES F, 3000 PSI
FLARELESS TITANIUM FITTINGS, INCLUDING JUMP SIZE, 45 DEGREES TO 45 DEGREES - FSC 4720
SAE-AS-4628-2000 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 DEGREE F, 3000 PSI
FLARELESS, TITANIUM FITTINGS, INCLUDING JUMP SIZE, 45 DEGREES TO 90 DEGREES - FSC 4720
SAE-AS-4629-2000 (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 DEGREES F, 3000 PSI
FLARELESS, TITANIUM FITTINGS, INCLUDING JUMP SIZE, 90 DEGREES TO 90 DEGREES
SAE-AS-4642-1992 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 PSI, FLARED, STRAIGHT TO
STRAIGHT, CRES FITTINGS - FSC 4720 |
