This standard is issued under the fixed designation A 692; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ュ) indicates an editorial change since the last revision or reapproval.
1.Scope
1.1 This specification covers a grade of medium-strength, seamless, carbon-molybrenum alloy-steel boiler and super-heater tubes.
1.2 This specification covers tubes 1/2 in. (12.7 mm) to 5 in. (127.0 mm), inclusive, in outside diameter and 0.035 to 0.500 in. (0.89 to 12.7 mm), inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished provided such tubes comply with all other requirements of this specification.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.
This standard is issued under the fixed designation A 692; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ュ) indicates an editorial change since the last revision or reapproval.
1.Scope
1.1 This specification covers a grade of medium-strength, seamless, carbon-molybrenum alloy-steel boiler and super-heater tubes.
1.2 This specification covers tubes 1/2 in. (12.7 mm) to 5 in. (127.0 mm), inclusive, in outside diameter and 0.035 to 0.500 in. (0.89 to 12.7 mm), inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished provided such tubes comply with all other requirements of this specification.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.
